EZStruder Cold End Kit

A place to talk about user-made mods and upgrades to their machines
Post Reply
kdoney
Noob
Posts: 4
Joined: Mon Dec 30, 2013 12:50 pm

EZStruder Cold End Kit

Post by kdoney » Mon Dec 30, 2013 1:02 pm

I need help on a

EZStruder Cold End Kit

It says it can be used for 3 or 1.75mm filament but the hole is much too small for 3mm. Do I have to drill it out? How about the guide to the cold end, do I have to bore this out as well?

kdoney
Noob
Posts: 4
Joined: Mon Dec 30, 2013 12:50 pm

Re: EZStruder Cold End Kit

Post by kdoney » Mon Dec 30, 2013 1:35 pm

I am talking about the bowden adapter.

User avatar
Eaglezsoar
ULTIMATE 3D JEDDI
Posts: 7185
Joined: Sun Apr 01, 2012 5:26 pm

Re: EZStruder Cold End Kit

Post by Eaglezsoar » Mon Dec 30, 2013 1:40 pm

kdoney wrote:I need help on a

EZStruder Cold End Kit

It says it can be used for 3 or 1.75mm filament but the hole is much too small for 3mm. Do I have to drill it out? How about the guide to the cold end, do I have to bore this out as well?


It works with a 3mm hotend as a direct drive see the video at http://reprap.org/wiki/EZStruder
“ Do Not Regret Growing Older. It is a Privilege Denied to Many. ”

Post Reply

Return to “Mods and Upgrades”