firmware install??

Post Reply
User avatar
Posts: 12
Joined: Fri Aug 10, 2012 9:42 pm
Location: Pana, Illinois

firmware install??

Post by hsb727 » Thu Aug 16, 2012 12:52 am

Is there firmware already installed on the ramps1.4 kit?
I assumed ( dangerous I know ) not and yet I get errors when
compiling the Repetier FW.. looking for a better source for firmware if
I must load one.

Posts: 736
Joined: Mon Mar 26, 2012 1:07 pm
Location: Goshen, IN

Re: firmware install??

Post by johnoly99 » Thu Aug 16, 2012 11:32 am

hsb, John here. The guys at ultimachine pre-load sprinter on the RAMPS boards. If you are having trouble compiling repetier, what version of arduino are you using? I've found if I use 0023 i don't get any problems, but V1.0 does have some compiling issues with some of the firmwares out there.

Posts: 2430
Joined: Mon Mar 26, 2012 1:44 pm
Location: Redmond WA

Re: firmware install??

Post by Polygonhell » Thu Aug 16, 2012 5:31 pm

Most firmware will not complile with 1.0 without additional libraries I believe these are sufficient ...

Marlin/Sprinter and Repetier all compile with 0.23 without issue

Post Reply

Return to “RAMPS”