How to connect the RAMPS to the H-1 motors

User avatar
cujul
Plasticator
Posts: 15
Joined: Wed Apr 11, 2012 4:43 pm

How to connect the RAMPS to the H-1 motors

Postby cujul » Sun Jul 29, 2012 4:54 am

Hello,

I bought a RAMPS 1.4 to remplace the original board of the H-1.

After a first connection test, the motors aren't working (they vibe a little). I think it's the connection between the RAMPS and the motors.

I use Printrun as software and Sprinter as firmware

So, how to connect the motors to the RAMPS ? (red wire to 1A port, green to 1B,... for example)

Thanks

User avatar
michaellatif
Printmaster!
Posts: 357
Joined: Mon Mar 26, 2012 1:34 pm
Location: RTP, NC

Re: How to connect the RAMPS to the H-1 motors

Postby michaellatif » Sun Jul 29, 2012 2:52 pm

Wiring diagram (use wire color coding to hook up motors).
http://reprap.org/wiki/RAMPS_1.4#Wiring
Mike Latif
H-1 #3


Return to “RAMPS”

Who is online

Users browsing this forum: No registered users and 1 guest