New 4 Axis Board - TB6560 question

User avatar
niner_zero
Plasticator
Posts: 5
Joined: Thu Aug 09, 2012 11:23 pm

New 4 Axis Board - TB6560 question

Postby niner_zero » Tue Aug 14, 2012 8:07 pm

I got a 4 Axis Board - TB6560 from SeeMeCNC store. Does this version require the opto coupler fix? Can some one please provide some info?

Thanks,
Jacob

User avatar
niner_zero
Plasticator
Posts: 5
Joined: Thu Aug 09, 2012 11:23 pm

Re: New 4 Axis Board - TB6560 question

Postby niner_zero » Tue Aug 14, 2012 9:16 pm

Never mind, I found the post. viewtopic.php?f=22&t=49

johnoly99
Printmaster!
Posts: 739
Joined: Mon Mar 26, 2012 1:07 pm
Location: Goshen, IN
Contact:

Re: New 4 Axis Board - TB6560 question

Postby johnoly99 » Wed Aug 15, 2012 3:08 pm

niner, some people don't have any problems with the optos, but some do? If in doubt, jumper them out. haha. I think it has to do with P port voltage, some ports are 3v and some 5v, i'd guess the 5v ones don't have any issues pushing thru the optos
SeeMeCNC Co-Founder & V.P.

User avatar
niner_zero
Plasticator
Posts: 5
Joined: Thu Aug 09, 2012 11:23 pm

Re: New 4 Axis Board - TB6560 question

Postby niner_zero » Tue Aug 21, 2012 9:59 pm

Removed the optos as described in this forum and rewired with reformed staple pins. Time to spin the motors

Image


Return to “Parallel Port based boards”

Who is online

Users browsing this forum: No registered users and 1 guest