Anybody using Astroprint?

User avatar
Jimustanguitar
ULTIMATE 3D JEDDI
Posts: 2618
Joined: Sun Mar 31, 2013 1:35 am
Location: Notre Dame area
Contact:

Anybody using Astroprint?

Postby Jimustanguitar » Tue Jan 06, 2015 9:52 am

https://astroprint.zendesk.com/hc/en-us ... nd-pcDuino

Recent discussions about Octoprint running poorly made me wonder about Astroprint. It sounds like a few members are talking about it in these two threads, but I thought it deserved its own discussion.
viewtopic.php?f=41&t=6866&p=57140&hilit=astroprint#p57140
and
viewtopic.php?f=59&t=6793&p=54104&hilit=astroprint#p54104



Has anyone run both images and compared the processor loads? I know Brian and a few guys from The MakerHive were playing around with it, but I don't know if anyone has compared the performance in a scientific way yet.

User avatar
jjjohnson
SeeMeCNC Staff
Posts: 36
Joined: Sat Jun 02, 2012 9:31 am
Location: Goshen, Indiana

Re: Anybody using Astroprint?

Postby jjjohnson » Tue Jan 05, 2016 2:39 pm

I have been running AstroPrint here recently on a Raspberry Pi 2 board and have been very pleased with the performance compared to what I had with the Raspberry Pi 1 board that I used a couple years ago... (Sorry I don't have any data on processing)

Instead of using the cloud slicing, I am still doing my slicing in MatterControl with MatterSlice as I like have my slice settings exactly where I like them. Slicing and uploading the GCODE is a breeze though so I don't mind.
JJ

User avatar
mhackney
ULTIMATE 3D JEDDI
Posts: 5402
Joined: Mon Mar 26, 2012 4:15 pm
Location: MA, USA
Contact:

Re: Anybody using Astroprint?

Postby mhackney » Tue Jan 05, 2016 6:23 pm

Seriously, take a look at Duet with RepRapPro firmware (dc42 branch). The delta auto calibration is excellent, it calculates every point of movement, no line segments and the built in web interface is most excellent. You get all this on a single board that you can connect to via USB or ethernet and with a $18 wifi bridge, you can have your printer on wifi. It really doesn't get any nicer or simpler in my experience.

Sublime Layers - my blog on Musings and Experiments in 3D Printing Technology and Art

Start Here:
A Strategy for Successful (and Great) Prints

Strategies for Resolving Print Artifacts

The Eclectic Angler


Return to “Other”

Who is online

Users browsing this forum: No registered users and 1 guest