Hello from Germany

Introduce yourself to the community!
Post Reply
Elysio
Printmaster!
Posts: 95
Joined: Thu Mar 13, 2014 6:55 am

Hello from Germany

Post by Elysio » Fri Mar 14, 2014 5:21 am

Hello.

My Name ist Chris. I`m from Germany and I really want to buy a 3D printer.
After long research of printers which can print large volumes, I found this Delta Printer from SeemeCNC.
I want to print life sized sculptures so your printer could be a interesting machine.

I will start some threads with basic questions.

Bye, Chris.

User avatar
Eaglezsoar
ULTIMATE 3D JEDDI
Posts: 7185
Joined: Sun Apr 01, 2012 5:26 pm

Re: Hello from Germany

Post by Eaglezsoar » Fri Mar 14, 2014 8:10 am

Welcome to the forum Chris.
We will try to answer any question you may have.
The Rostock Max series has the largest print area of any printer that is available for the consumer.

User avatar
aehM_Key
Printmaster!
Posts: 200
Joined: Sun Nov 18, 2012 4:46 am
Location: Germany
Contact:

Re: Hello from Germany

Post by aehM_Key » Sat Mar 15, 2014 7:20 am

Hallo Chris!

Viel Erfolg :)
Wirst wohl bei PLA als Material landen.

Gruß
Markus

Elysio
Printmaster!
Posts: 95
Joined: Thu Mar 13, 2014 6:55 am

Re: Hello from Germany

Post by Elysio » Mon Mar 17, 2014 11:41 am

Servus Markus!

PLA . Ich denke sicherlich hängt das von der Verwendung ab ?
Wo her kommst du ? Vielleicht wohnen wir ja neben an ? ;-)
Ich werde mir das Gerät in den nächsten Tagen bestellen, ich bin ja schon gespannt.
Welchen Drucker hast du ?

Ciao.

User avatar
aehM_Key
Printmaster!
Posts: 200
Joined: Sun Nov 18, 2012 4:46 am
Location: Germany
Contact:

Re: Hello from Germany

Post by aehM_Key » Mon Mar 17, 2014 1:08 pm

Probably better to speak Englisch ;)

Yes, PLA is less stable then ABS but ABS shrinks more, so it is not so good for large prints.

I live now 3km north of Schweinfurt.

I have a RMax of the first Indiegogo-Genereation but with some modifications (viewtopic.php?f=42&t=1289 , viewtopic.php?f=54&t=2137 , viewtopic.php?f=54&t=2070 , etc.)

Elysio
Printmaster!
Posts: 95
Joined: Thu Mar 13, 2014 6:55 am

Re: Hello from Germany

Post by Elysio » Tue Mar 18, 2014 8:03 am

Yes let`s practise english :D

Wow really impressive modifications, now I`m much more convinced to buy a Max, because I know I can ask you :P
You wont believe me, but as I saw your modification that the filament runs trough a centre hole on the top , I knew this is the first modification I would do when I will have my Max in some weeks. Because this was my first idea when I saw the Max for some days ago.
You have a lot of usefull modifications, even a emergency "deadman" :mrgreen: switch is very good and practical. Also a hull was one of my first idea for a modification, to prevent toxic smell. I think a active ventilation with a fan is important.

Anyway Markus maybe we can have a call in the next days.

Bye Chris.

Elysio
Printmaster!
Posts: 95
Joined: Thu Mar 13, 2014 6:55 am

Re: Hello from Germany

Post by Elysio » Fri Apr 11, 2014 4:08 pm

Hello

My Max arrived today, lets start essambling this machine.
I guess I will ask a lot of questions. :P
Bye, see you later.

Post Reply

Return to “New Member introduction”