I now have a pro key.

Talk about KISSlicer software here (http://kisslicer.com)
User avatar
Print_This
Printmaster!
Posts: 86
Joined: Sun Feb 23, 2014 11:56 pm

I now have a pro key.

Postby Print_This » Tue Mar 04, 2014 8:16 pm

I now have a pro key.

looking at the benefit of pro version options,

hope we can get sequential printing and better bridging support next :)
Last edited by Print_This on Thu May 01, 2014 5:53 pm, edited 2 times in total.
--------------
If you survive chicago winters you can survive 3d printing!

User avatar
Flateric
Printmaster!
Posts: 825
Joined: Fri Feb 15, 2013 4:35 pm
Location: Calgary, Alberta

Re: Question about recieving for Pro user registration Key

Postby Flateric » Tue Mar 04, 2014 9:54 pm

I have been concerned about the guys update rate for some time now. I am wondering if he is letting his key issuing go slack as well.
"Now you see why evil will always triumph! Because good is dumb." - Spaceballs

User avatar
Print_This
Printmaster!
Posts: 86
Joined: Sun Feb 23, 2014 11:56 pm

Re: Question about recieving for Pro user registration Key

Postby Print_This » Fri Mar 21, 2014 8:37 pm

i wonder if because of the email i used that maybe it rejected the automated email his pro key is sent out to. i am gonna try with a more practical email account like gmail etc see what happens.
--------------
If you survive chicago winters you can survive 3d printing!

User avatar
bubbasnow
ULTIMATE 3D JEDDI
Posts: 1064
Joined: Fri Aug 02, 2013 4:24 pm
Location: Dayton, WA

Re: Question about recieving for Pro user registration Key

Postby bubbasnow » Fri Mar 21, 2014 8:47 pm

has he charged your account yet? if he hasent, i would not purchase this software. its is a good tool but development has stopped without notice. and it will hinder your machine in the long run if you plan to upgrade to dual extruders in the future.

User avatar
mhackney
ULTIMATE 3D JEDDI
Posts: 5411
Joined: Mon Mar 26, 2012 4:15 pm
Location: MA, USA
Contact:

Re: Question about recieving for Pro user registration Key

Postby mhackney » Fri Mar 21, 2014 8:49 pm

PROCEED WITH CAUTION. The developer has been missing since September. No one knows anything about what may have happened. I suspect that his site uses an automatic key generator and that perhaps that has met it's demise too. I would caution against spending money for the Pro key - as much as I LOVE KISSslicer - until things change.

Sublime Layers - my blog on Musings and Experiments in 3D Printing Technology and Art

Start Here:
A Strategy for Successful (and Great) Prints

Strategies for Resolving Print Artifacts

The Eclectic Angler

User avatar
Print_This
Printmaster!
Posts: 86
Joined: Sun Feb 23, 2014 11:56 pm

Re: Question about recieving for Pro user registration Key

Postby Print_This » Fri Mar 21, 2014 8:57 pm

mhackney wrote:PROCEED WITH CAUTION. The developer has been missing since September. No one knows anything about what may have happened. I suspect that his site uses an automatic key generator and that perhaps that has met it's demise too. I would caution against spending money for the Pro key - as much as I LOVE KISSslicer - until things change.


does the pro version allow sequential printing? that is a must thing for me right now and i really like the results of the kisslicer generator. that will determine if i will try for pro again.
Last edited by Print_This on Fri Mar 21, 2014 9:30 pm, edited 1 time in total.
--------------
If you survive chicago winters you can survive 3d printing!

User avatar
bubbasnow
ULTIMATE 3D JEDDI
Posts: 1064
Joined: Fri Aug 02, 2013 4:24 pm
Location: Dayton, WA

Re: Question about recieving for Pro user registration Key

Postby bubbasnow » Fri Mar 21, 2014 8:59 pm

that is called sequential printing, slic3r supports that but i don't think kiss does

User avatar
mhackney
ULTIMATE 3D JEDDI
Posts: 5411
Joined: Mon Mar 26, 2012 4:15 pm
Location: MA, USA
Contact:

Re: Question about recieving for Pro user registration Key

Postby mhackney » Fri Mar 21, 2014 9:00 pm

No, you simply can add multiple parts to the platter. KISS does the layout. Then it slices all of them. They print 1 layer at a time across all parts.

Sublime Layers - my blog on Musings and Experiments in 3D Printing Technology and Art

Start Here:
A Strategy for Successful (and Great) Prints

Strategies for Resolving Print Artifacts

The Eclectic Angler

User avatar
Print_This
Printmaster!
Posts: 86
Joined: Sun Feb 23, 2014 11:56 pm

Re: Question about recieving for Pro user registration Key

Postby Print_This » Fri Mar 21, 2014 9:11 pm

mhackney wrote:No, you simply can add multiple parts to the platter. KISS does the layout. Then it slices all of them. They print 1 layer at a time across all parts.


that is a huge bummer, parts would be even cleaner if the head didnt have to travel back and forth, BUMMER!

i guess ill have to keep using free and play with cura more unless you guys think its worth trying something more interesting giving similar results as kisslicer
--------------
If you survive chicago winters you can survive 3d printing!

User avatar
mhackney
ULTIMATE 3D JEDDI
Posts: 5411
Joined: Mon Mar 26, 2012 4:15 pm
Location: MA, USA
Contact:

Re: Question about recieving for Pro user registration Key

Postby mhackney » Fri Mar 21, 2014 9:15 pm

I haven't found anything I like as well as KISS. It's such a bummer.

Sublime Layers - my blog on Musings and Experiments in 3D Printing Technology and Art

Start Here:
A Strategy for Successful (and Great) Prints

Strategies for Resolving Print Artifacts

The Eclectic Angler

User avatar
bubbasnow
ULTIMATE 3D JEDDI
Posts: 1064
Joined: Fri Aug 02, 2013 4:24 pm
Location: Dayton, WA

Re: Question about recieving for Pro user registration Key

Postby bubbasnow » Fri Mar 21, 2014 9:31 pm

like i said slic3r has this option, as well as the new simplify3d creator...

User avatar
Print_This
Printmaster!
Posts: 86
Joined: Sun Feb 23, 2014 11:56 pm

Re: Question about recieving for Pro user registration Key

Postby Print_This » Fri Mar 21, 2014 9:33 pm

bubbasnow wrote:like i said slic3r has this option, as well as the new simplify3d creator...


yea i started with slic3r it just doesn't compare in results versus kisslicer, well at least i couldn't tweak anyways, not to say others are not getting good results, i believe they are, but instantly using kiss for the first time was significant difference,
--------------
If you survive chicago winters you can survive 3d printing!


Return to “KISSlicer”

Who is online

Users browsing this forum: No registered users and 1 guest