Simplify3D profile for stock Rostock MAX v3.2?

This forum is for discussions specific to the Duet-equipped Rostock MAX v3.2 3D printer.
User avatar
TedMilker
Prints-a-lot
Posts: 26
Joined: Mon Dec 02, 2013 3:38 pm

Simplify3D profile for stock Rostock MAX v3.2?

Postby TedMilker » Thu Sep 13, 2018 6:58 pm

Anyone have a profile they'd share for Simplify3D for stock Rostock MAX v3.2?

User avatar
geneb
ULTIMATE 3D JEDDI
Posts: 4707
Joined: Mon Oct 15, 2012 12:47 pm
Location: Graham, WA
Contact:

Re: Simplify3D profile for stock Rostock MAX v3.2?

Postby geneb » Fri Sep 14, 2018 8:05 am

The attached is for the Artemis, but it should work fine on the 3.2. Jim Carter built it.
Artemis.txt
(11.63 KiB) Downloaded 10 times


You'll need to change the extension from "txt" to "fff".

g.
Delta Power!
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects

User avatar
TedMilker
Prints-a-lot
Posts: 26
Joined: Mon Dec 02, 2013 3:38 pm

Re: Simplify3D profile for stock Rostock MAX v3.2?

Postby TedMilker » Fri Sep 14, 2018 6:45 pm

Thanks geneb!

User avatar
geneb
ULTIMATE 3D JEDDI
Posts: 4707
Joined: Mon Oct 15, 2012 12:47 pm
Location: Graham, WA
Contact:

Re: Simplify3D profile for stock Rostock MAX v3.2?

Postby geneb » Sat Sep 15, 2018 11:43 am

You're welcome!

g.
Delta Power!
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects

User avatar
jcarlin
Plasticator
Posts: 14
Joined: Fri Aug 04, 2017 8:23 am

Re: Simplify3D profile for stock Rostock MAX v3.2?

Postby jcarlin » Sun Sep 16, 2018 8:33 pm

Been working on this Rostock Max v3.2 FFF for Simplify3D and I am pretty sure its just about there. I took a mix of the standard Simplify3D profile for the RMAXv3, the proposed settings for Cura from SeeMeCNC and the settings for the Artemis. It prints very nicely on my freshly upgraded v3.2. You might need to tweak the temps for your own liking.

I also included a bonus! Messing around I figured out how to add the Rostock base under the build plane. The .stl and where to put it are included in the zip file. Move the file into place before you import the FFF.

Example image: https://drive.google.com/file/d/1gwIcXZVLACP-AzHsV-jv72wl5h-D5CjV/view?usp=sharing

Here are the files:
RMAXV32_SIMPLIFY3D.zip
(800.08 KiB) Downloaded 8 times
R-Max v3.2 (upgraded)
Powerspec Ultra


Simplify3D

User avatar
jcarlin
Plasticator
Posts: 14
Joined: Fri Aug 04, 2017 8:23 am

Re: Simplify3D profile for stock Rostock MAX v3.2?

Postby jcarlin » Thu Sep 20, 2018 7:50 pm

I have a new version of my S3D FFF for the v3.2...

Spent most of the day tweaking the settings until I virtually eliminated my stringing. Still dialing everything in, but thought I would share my work in process.

SeeMeCNC Rostock Max v3.2 version 2.fff.zip
(3 KiB) Downloaded 12 times
R-Max v3.2 (upgraded)
Powerspec Ultra


Simplify3D

User avatar
TedMilker
Prints-a-lot
Posts: 26
Joined: Mon Dec 02, 2013 3:38 pm

Re: Simplify3D profile for stock Rostock MAX v3.2?

Postby TedMilker » Sat Sep 29, 2018 7:13 pm

Thanks for posting jcarlin, I'm going to give your config a shot tomorrow.

User avatar
TedMilker
Prints-a-lot
Posts: 26
Joined: Mon Dec 02, 2013 3:38 pm

Re: Simplify3D profile for stock Rostock MAX v3.2?

Postby TedMilker » Tue Oct 09, 2018 7:49 am

jcarlin wrote:I have a new version of my S3D FFF for the v3.2...

SeeMeCNC Rostock Max v3.2 version 2.fff.zip


Just curious, why is the build area so small in this setup?

User avatar
TedMilker
Prints-a-lot
Posts: 26
Joined: Mon Dec 02, 2013 3:38 pm

Re: Simplify3D profile for stock Rostock MAX v3.2?

Postby TedMilker » Thu Oct 11, 2018 12:19 am

Used jcarlin's profile for the first time for real tonight and it worked great. Made a couple changes though: Changed build volume to proper 265x265x395. I also used Magigoo so I set the initial layer height and width to 100% because it was squishing too much and causing the extruder to click from the back pressure. Thinking about changing the nozzle size to 0.4 next print.

I guess what I'm finding the best with Simplify3D is that Cura is super inefficient with travels and acts like it has ADD(stops in the middle of part of the infill and jumps somewhere else then comes back) so it prints way, way slower. Tonight's print, for example, took around 2 hours and 18 minutes for the estimate and I think it ended up being about that long(maybe a bit longer). Cura's estimate for the same model with equivalent settings: 3 hours, 55 minutes and that's probably accurate too from my experience.

Cura definitely has the better UI though. Everything is just kind of a hassle in S3D to tweak while Cura has them organized pretty well with descriptions of what every option does and affects. I much prefer Cura's gizmos for model orientation/translation/scale than S3D's hand entries.

User avatar
jcarlin
Plasticator
Posts: 14
Joined: Fri Aug 04, 2017 8:23 am

Re: Simplify3D profile for stock Rostock MAX v3.2?

Postby jcarlin » Tue Oct 16, 2018 6:14 pm

I used the build dimensions from the original S3D profile for the Rostock Max. I've taken your setting and will try them, thanks!
R-Max v3.2 (upgraded)
Powerspec Ultra


Simplify3D


Return to “Rostock MAX v3.2”

Who is online

Users browsing this forum: No registered users and 1 guest