First batch of Artemis is out the door.

The one, the only, the Atremis. Forum for the monster metal machine from SeeMeCNC
User avatar
pouncingiguana
Printmaster!
Posts: 150
Joined: Tue Nov 15, 2016 8:48 am

First batch of Artemis is out the door.

Postby pouncingiguana » Fri Dec 22, 2017 7:58 am

We just finished shipping the first batch of Artemis, including the first RTP! Now we get to build up the parts and pieces to go for the next round. Guess I'd better finish the setup manual today before everyone starts building... it doesn't take much time to slap one together.

User avatar
felich
Plasticator
Posts: 14
Joined: Fri Oct 21, 2016 3:41 pm
Contact:

Re: First batch of Artemis is out the door.

Postby felich » Tue Jan 16, 2018 1:53 pm

I am the guy that received the RTP.
I am having no luck seeing the web page.
Please see my post "No joy with browser connection"
Thanks for any help you can provide.

User avatar
pouncingiguana
Printmaster!
Posts: 150
Joined: Tue Nov 15, 2016 8:48 am

Re: First batch of Artemis is out the door.

Postby pouncingiguana » Wed Jan 17, 2018 7:45 am

Please submit a support ticket (https://seemecnc.zendesk.com/hc/en-us/requests/new?) and we'll get you up and going!

ripacheco
Plasticator
Posts: 6
Joined: Wed Jan 17, 2018 1:44 am

Re: First batch of Artemis is out the door.

Postby ripacheco » Wed Jan 17, 2018 9:41 am

Congratulations being so busy filling orders !
I know a few managers that would like to have your “ problem”

User avatar
felich
Plasticator
Posts: 14
Joined: Fri Oct 21, 2016 3:41 pm
Contact:

Re: First batch of Artemis is out the door.

Postby felich » Wed Jan 17, 2018 6:04 pm

SD chip wasn't seated properly.
AOK now.

dc42
Printmaster!
Posts: 413
Joined: Mon Mar 07, 2016 10:17 am

Re: First batch of Artemis is out the door.

Postby dc42 » Wed Jan 17, 2018 6:06 pm

felich wrote:SD chip wasn't seated properly.
AOK now.


There should be a positive click when the SD card is seated properly, then to get it out you have to push it again.

User avatar
pouncingiguana
Printmaster!
Posts: 150
Joined: Tue Nov 15, 2016 8:48 am

Re: First batch of Artemis is out the door.

Postby pouncingiguana » Thu Jan 18, 2018 7:19 am

Glad you're up and running. I'm going to add some documentation to have people check that when they are unpacking their printer.


Return to “Artemis”

Who is online

Users browsing this forum: No registered users and 2 guests