H2 is a great printer

An affordable delta DIY kit made with high quality electronics/parts/hardware
coyn
Noob
Posts: 1
Joined: Thu Mar 23, 2017 9:27 am

H2 is a great printer

Postby coyn » Mon Mar 27, 2017 8:30 am

I built my H2 last week. After putting about 32 hours of print time on it over the weekend, I have to say that this is a great setup. It's my first printer and it went together and prints great.

magicmarc
Printmaster!
Posts: 42
Joined: Sun Mar 19, 2017 12:55 am

Re: H2 is a great printer

Postby magicmarc » Tue Mar 28, 2017 7:50 am

what are you using to hold the first layer down to the glass.... ? im using blue painters tape currently with PLAS at 215 degrees... but the ABS is giving me problems sticking down..
------------------------
Magic Marc
Hacker H2 Delta - completed build... now trying to upgrade w/mods and learn Tinkercad to start with....

User avatar
geneb
ULTIMATE 3D JEDDI
Posts: 4273
Joined: Mon Oct 15, 2012 12:47 pm
Location: Graham, WA
Contact:

Re: H2 is a great printer

Postby geneb » Tue Mar 28, 2017 10:09 am

magicmarc, unless you've got a heated bed installed, there's no way you can print ABS on the H2.

Adding a heated bed is pretty easy though - you can install the Onyx heated bed for the Orion and then replace your stock power supply with a larger one. I've been told an XBox power supply can be used, but since I don't have the details (yet), I can't give you a recommendation on that.

g.
Delta Power!
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects

User avatar
pouncingiguana
Printmaster!
Posts: 82
Joined: Tue Nov 15, 2016 8:48 am

Re: H2 is a great printer

Postby pouncingiguana » Mon Apr 03, 2017 2:41 pm

Washable glue stick on the glass will hold ABS pretty well.

magicmarc
Printmaster!
Posts: 42
Joined: Sun Mar 19, 2017 12:55 am

Re: H2 is a great printer

Postby magicmarc » Fri Apr 07, 2017 9:07 pm

i havent heard of the washable glue stick, may i ask which brand makes this? thanks!
marc
------------------------
Magic Marc
Hacker H2 Delta - completed build... now trying to upgrade w/mods and learn Tinkercad to start with....

User avatar
geneb
ULTIMATE 3D JEDDI
Posts: 4273
Joined: Mon Oct 15, 2012 12:47 pm
Location: Graham, WA
Contact:

Re: H2 is a great printer

Postby geneb » Sat Apr 08, 2017 9:54 am

Elmer's Disappearing Purple glue stick.

g.
Delta Power!
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects


Return to “Hacker Series - H2”

Who is online

Users browsing this forum: No registered users and 1 guest