PCB Board Rev 6a

The new for 2016 Rostock MAX v3!
User avatar
Morriz
Plasticator
Posts: 19
Joined: Wed Dec 14, 2016 4:32 am
Location: Pieve di Teco - IM - Italy

PCB Board Rev 6a

Postby Morriz » Wed Feb 14, 2018 10:13 am

Anyone has PCB Board Rev 6a schema?
Pin voltage / use?

Thank you,
Marcello

User avatar
geneb
ULTIMATE 3D JEDDI
Posts: 4701
Joined: Mon Oct 15, 2012 12:47 pm
Location: Graham, WA
Contact:

Re: PCB Board Rev 6a

Postby geneb » Wed Feb 14, 2018 10:38 pm

Can you clarify what "rev 6a" pcb you're talking about? :)

g.
Delta Power!
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects

User avatar
Morriz
Plasticator
Posts: 19
Joined: Wed Dec 14, 2016 4:32 am
Location: Pieve di Teco - IM - Italy

Re: PCB Board Rev 6a

Postby Morriz » Thu Feb 15, 2018 4:53 am

This one:

https://www.seemecnc.com/collections/pa ... -pcb-board

that is different from rev 5a schemes on GitHub site.

User avatar
geneb
ULTIMATE 3D JEDDI
Posts: 4701
Joined: Mon Oct 15, 2012 12:47 pm
Location: Graham, WA
Contact:

Re: PCB Board Rev 6a

Postby geneb » Thu Feb 15, 2018 8:23 am

Delta Power!
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects

User avatar
Morriz
Plasticator
Posts: 19
Joined: Wed Dec 14, 2016 4:32 am
Location: Pieve di Teco - IM - Italy

Re: PCB Board Rev 6a

Postby Morriz » Thu Feb 15, 2018 8:36 am

I saw that on new Rev 6A of PCB there're new 2 pins socks named PROBE, LED and 3 FAN PART than 1.

What is the use of PROBE? Voltage In/out?
Voltage Out of LED? Always ON?

Thanks,
Marcello

User avatar
geneb
ULTIMATE 3D JEDDI
Posts: 4701
Joined: Mon Oct 15, 2012 12:47 pm
Location: Graham, WA
Contact:

Re: PCB Board Rev 6a

Postby geneb » Fri Feb 16, 2018 4:15 pm

I'm not sure what the changes are related to - I don't have one of the newer boards.

g.
Delta Power!
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects

User avatar
pouncingiguana
Printmaster!
Posts: 150
Joined: Tue Nov 15, 2016 8:48 am

Re: PCB Board Rev 6a

Postby pouncingiguana » Sat Feb 17, 2018 3:48 pm

The probe pin locations are not used.

The LED pins are always on hooked to the main power for the hot end (nom 12v always on).

The three part fans are wired in parallel with each other.

The Heatsink fan is wired to the hot end main power (always on)

User avatar
Morriz
Plasticator
Posts: 19
Joined: Wed Dec 14, 2016 4:32 am
Location: Pieve di Teco - IM - Italy

Re: PCB Board Rev 6a

Postby Morriz » Tue Feb 20, 2018 4:39 am

Thank you pouncingiguana

Marcello


Return to “Rostock MAX v3”

Who is online

Users browsing this forum: No registered users and 1 guest