OctopPrint not connecting

The new for 2016 Rostock MAX v3!
User avatar
sfuelberth
Prints-a-lot
Posts: 34
Joined: Sun Aug 07, 2016 9:22 pm

OctopPrint not connecting

Postby sfuelberth » Tue Oct 17, 2017 1:48 pm

So I upgrade OctopPrint to 1.3.5 and now when OctoPrint is trying to connect it hangs, also it seems that the printer is returning garbage. Has anyone seen this? I can control the printer just fine through the LED screen, so I am not really sure what is going on here. Thanks.

Connecting to: /dev/ttyACM0
Changing monitoring state from 'Offline' to 'Opening serial port'
Connected to: Serial<id=0x6d3b2270, open=True>(port='/dev/ttyACM0', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=10.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor
Starting baud rate detection
Changing monitoring state from 'Opening serial port' to 'Detecting baudrate'
Trying baudrate: 115200
Send: N0 M110 N0*125
Recv: �n�\x16��\x7f;}\x03]�k�^�>6
6q
Recv: \x15�J�I�JHJ�
Recv: j�\x1f�?��\x1f�
Recv: j��\x1f��j��\x1f��j�\x1f����\x1f��:�M\x0f\x02��l\x7fa^!hHHJ�j\x08N��a�*��\x7f\x04�/�_]�:XI\x03Ha�{\x0e\x16\x7fV~�\x0eHgH\x0f�H6\x13�\x0c'Ho�HV\x13�\x0c'Ho�HV\x13�;�6J�
Recv: _S�;�V
Recv: �\x08_\x13�\x0c'Ho�hV\x13�,'H/�h\x16\x13HH'Ho�HV\x13hHgH\x0f�h6\x13�\x0cgH\x0f�H6\x13�\x0c'Ho�HV\x13��~\x16J�
Recv: _\x13�,\x07H/�h\x16S��^V
Recv: \x03\x0c_\x13�\x0c'Ho�HV\x13�,'H/�h\x16\x13��~\x16J\x03\x08_\x13�,\x07H/�h\x16SH�>V
Recv: \x03\x08_\x13\x08HgH\x0f�h6\x13h�~6jC
Recv: _\x13HH\x07H/�h\x16S��>\x16
Recv: \x03\x08_\x13�\x0c'H/�h\x16\x13\x08�^Vj\x03\x08\x1f\x13hH\x07H/�h6S��~\x16J\x03

User avatar
geneb
ULTIMATE 3D JEDDI
Posts: 4689
Joined: Mon Oct 15, 2012 12:47 pm
Location: Graham, WA
Contact:

Re: OctopPrint not connecting

Postby geneb » Tue Oct 17, 2017 5:09 pm

The baud rate should be 250000.

g.
Delta Power!
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects

tehwadeski
Plasticator
Posts: 8
Joined: Sat Dec 03, 2016 4:25 pm

Re: OctopPrint not connecting

Postby tehwadeski » Thu Dec 28, 2017 7:11 pm

Thanks for posting the baud rate! Older version of octoprint would detect the baud rate on its own. Explicitly setting the 250000 value fixed my connections issue.

Thanks again.

User avatar
geneb
ULTIMATE 3D JEDDI
Posts: 4689
Joined: Mon Oct 15, 2012 12:47 pm
Location: Graham, WA
Contact:

Re: OctopPrint not connecting

Postby geneb » Fri Dec 29, 2017 12:51 pm

You're welcome!

g.
Delta Power!
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects


Return to “Rostock MAX v3”

Who is online

Users browsing this forum: No registered users and 1 guest