Rostock max 3.0 to 3.3 conversion

The new for 2016 Rostock MAX v3!
Post Reply
Firefly innovations
Posts: 1
Joined: Mon Jan 02, 2017 12:32 am

Rostock max 3.0 to 3.3 conversion

Post by Firefly innovations » Thu Feb 07, 2019 5:49 am

Hi all
Hi from the land down under
I run 7x Rostock max V3 machines mostly run abs and tpu filiments am curious about the 3.2 conversions apart from the noise reduction do you guys think the conversion makes much difference to A V3
I also prefer to use simplify 3d for the slicer

What I would like to achieve is better accuracy possibly quicker zeroing (and more consistent)
I find tha auto calibration on the v3 max limited and quite often run the 12 point calibration software and enter the scale factors manually

Also if you go to the V3.2 conversion are you limited to web braised control or it it possible to have local control on the machine

Thanks in advance for your imput

User avatar
Posts: 4836
Joined: Mon Oct 15, 2012 12:47 pm
Location: Graham, WA

Re: Rostock max 3.0 to 3.3 conversion

Post by geneb » Thu Feb 07, 2019 8:49 am

The performance improvement due to moving to a 32 bit controller is significant. The precise auto calibration is nearly witchcraft. :)

You can use a color LCD touch screen with the v3.2 upgrade, but you really don't need to if you can connect to it via browser. I wouldn't ever recommend printing via USB with the Duet - or any printer for that matter.

Delta Power!
Defeat the Cartesian Agenda! - 80-0007, The only one of its kind. - Technical and Simulator Projects

Post Reply

Return to “Rostock MAX v3”