Enclosure for 7" Panel Due

DerStig
Printmaster!
Posts: 159
Joined: Fri Feb 20, 2015 3:00 am

Enclosure for 7" Panel Due

Postby DerStig » Tue Jan 03, 2017 1:27 am

I saw a enclosure for the 7" screen that fit in the Rostock Max V2 original LCD bay. It was also tilted. Anyone remember that one? I'm looking to print it.

Thanks

User avatar
Jimustanguitar
ULTIMATE 3D JEDDI
Posts: 2618
Joined: Sun Mar 31, 2013 1:35 am
Location: Notre Dame area
Contact:

Re: Enclosure for 7" Panel Due

Postby Jimustanguitar » Tue Jan 03, 2017 1:30 am

DC42 has one. He is the Duet and Due guy, after all.
http://www.thingiverse.com/thing:656884

DerStig
Printmaster!
Posts: 159
Joined: Fri Feb 20, 2015 3:00 am

Re: Enclosure for 7" Panel Due

Postby DerStig » Tue Jan 03, 2017 2:19 am

That ones not it, I found it searching

http://forum.seemecnc.com/download/file.php?id=11783

User avatar
crocky
Printmaster!
Posts: 270
Joined: Tue Aug 12, 2014 6:55 pm
Location: Werribee, Aust

Re: Enclosure for 7" Panel Due

Postby crocky » Tue Jan 03, 2017 4:32 pm

It suits what I have in mind as well...

Looks like it must have the pcb mounted with a extension cable or maybe it is off-center... there must be a cover that goes on the front of it?
Bob
Rostock Max V2, Ball Cup Arms, New Carriages, HE280, Dampers, PSU Breathing, Simplify 3D, GeckoTek3D, Raspberry Pi3. Duet soon... Kossel Mini still under construction.
Delta's are the way!

DerStig
Printmaster!
Posts: 159
Joined: Fri Feb 20, 2015 3:00 am

Re: Enclosure for 7" Panel Due

Postby DerStig » Tue Jan 03, 2017 6:21 pm

crocky wrote:It suits what I have in mind as well...

Looks like it must have the pcb mounted with a extension cable or maybe it is off-center... there must be a cover that goes on the front of it?


The mounts for the PanelDue driver and the Duet are in the "snorkel" plus there is a cover, I forgot to link it

http://forum.seemecnc.com/download/file.php?id=11747

User avatar
Outsider
Printmaster!
Posts: 59
Joined: Wed Nov 11, 2015 6:09 pm

Re: Enclosure for 7" Panel Due

Postby Outsider » Tue Jan 03, 2017 8:29 pm

you have version 2.4
here is a copy of version 2.6


your faceplate is version 1.5
here is version 1.8
PanelDue and Duet Faceplate V2 Version 1.8.stl
(4.89 MiB) Downloaded 28 times

User avatar
CRPerryJr
Printmaster!
Posts: 107
Joined: Mon Mar 30, 2015 7:21 pm
Location: Hartland, MI

Re: Enclosure for 7" Panel Due

Postby CRPerryJr » Tue Jan 03, 2017 10:20 pm

SeeMeCNC Rostock Max V2
Makerbot Replicator Gen 5

3D-Print
Printmaster!
Posts: 519
Joined: Mon Jan 05, 2015 9:39 pm
Location: Omaha, Nebraska

Re: Enclosure for 7" Panel Due

Postby 3D-Print » Tue Jan 03, 2017 11:29 pm

Here is how I attached the Due and Duet using the mount.

viewtopic.php?f=42&t=7303&start=100#p85491
My 3D-Printing learning curve is asymptotic to a Delta's X, Y and Z-axes

User avatar
crocky
Printmaster!
Posts: 270
Joined: Tue Aug 12, 2014 6:55 pm
Location: Werribee, Aust

Re: Enclosure for 7" Panel Due

Postby crocky » Wed Jan 04, 2017 12:33 am

Outsider wrote:you have version 2.4
here is a copy of version 2.6
PanelDue and Duet Base for ROSTOCK Max V2 - Version 2.6.stl

your faceplate is version 1.5
here is version 1.8
PanelDue and Duet Faceplate V2 Version 1.8.stl


Thank you..... :) and 3D Print?
Bob
Rostock Max V2, Ball Cup Arms, New Carriages, HE280, Dampers, PSU Breathing, Simplify 3D, GeckoTek3D, Raspberry Pi3. Duet soon... Kossel Mini still under construction.
Delta's are the way!


Return to “Duet”

Who is online

Users browsing this forum: No registered users and 1 guest