Openbeam/misumi HFS3-1515

A place for the physical connections
User avatar
Vinculum
Prints-a-lot
Posts: 23
Joined: Mon Jul 08, 2013 3:28 am
Location: Netherlands

Openbeam/misumi HFS3-1515

Postby Vinculum » Wed Aug 07, 2013 3:36 pm

After a succesfull Rostock build i want to make a Kossel. But the main part, the openbeam extrusions are not to be found in europe. Misumi HFS3-1515 should be almost the same but i can't order it as an individual. Do you guys know where i can get any of these to be sent to the Netherlands? I've found 1 site but shipping was $70!! That's insane!

User avatar
Flateric
Printmaster!
Posts: 825
Joined: Fri Feb 15, 2013 4:35 pm
Location: Calgary, Alberta

Re: Openbeam/misumi HFS3-1515

Postby Flateric » Thu Aug 08, 2013 3:46 pm

I've googled and searched but can't find a single reference to the model you give. Can you link me.
"Now you see why evil will always triumph! Because good is dumb." - Spaceballs

User avatar
dbarrans
Printmaster!
Posts: 275
Joined: Thu Jan 03, 2013 4:14 am

Re: Openbeam/misumi HFS3-1515

Postby dbarrans » Sat Aug 10, 2013 11:55 am


User avatar
JohnStack
Printmaster!
Posts: 852
Joined: Thu Jan 03, 2013 7:07 pm
Location: Carlsbad, CA
Contact:

Re: Openbeam/misumi HFS3-1515

Postby JohnStack » Sat Aug 10, 2013 3:15 pm

Vinculum wrote:After a succesfull Rostock build i want to make a Kossel. But the main part, the openbeam extrusions are not to be found in europe. Misumi HFS3-1515 should be almost the same but i can't order it as an individual. Do you guys know where i can get any of these to be sent to the Netherlands? I've found 1 site but shipping was $70!! That's insane!


There were some on eBay US by 8020 last week. Maybe it's worth buying and shipping...
Technologist, Maker, Willing to question conventional logic
http://dropc.am/p/KhiI1a

User avatar
Flateric
Printmaster!
Posts: 825
Joined: Fri Feb 15, 2013 4:35 pm
Location: Calgary, Alberta

Re: Openbeam/misumi HFS3-1515

Postby Flateric » Sat Aug 10, 2013 9:39 pm

Doesn't Seeme sell this?
"Now you see why evil will always triumph! Because good is dumb." - Spaceballs

User avatar
CJGerard
Printmaster!
Posts: 127
Joined: Thu Jul 04, 2013 3:07 am
Location: Dayton, OH

Re: Openbeam/misumi HFS3-1515

Postby CJGerard » Tue Aug 13, 2013 1:34 am

8020 sells its overstock on ebay so you should be able to get it there. Also MSC http://www.mscdirect.com/ sells 8020, that's where i bought mine through so i could put it on my companies tool bill. :)
Boss 1 - "I'm tiered of arguing with you! You come up with the MOST Stupid-Outlandish-Impossible way to do something & then you walk out into the shop and DO IT and IT WORKS. Its no fun anymore."
Boss 2 - "Huh? Chris is a Ninja?"

timothysvec
Printmaster!
Posts: 67
Joined: Mon Apr 02, 2012 8:52 am

Re: Openbeam/misumi HFS3-1515

Postby timothysvec » Tue Aug 13, 2013 9:53 pm

http://openbuildspartstore.com/

Have you seen this? Look's pretty good.

Cheer's


Return to “Nuts and Bolts”

Who is online

Users browsing this forum: No registered users and 3 guests