SIMPLE CONNECTOR FOR HOTEND WIRING COMING SOON

Do you print/build/make/create 'stuff' for modifying SeeMeCNC machines? Post them here if you do so others can see and inquire about getting them!
User avatar
Jassper
Printmaster!
Posts: 146
Joined: Wed Jul 10, 2013 10:21 pm

SIMPLE CONNECTOR FOR HOTEND WIRING COMING SOON

Postby Jassper » Fri Apr 07, 2017 10:01 pm

In the beginning.....

There was a rats nest of wires, twisted, soldered and tapped.

Then came the Yellow Jacket Quick change hot-end plate.... and it was good.

Image

Then came Trick Laser, E3D, and 713Maker presenting a multitude of choices for the user.... and it was good

Image

Now, in the ultimate engineering trifecta with Trick Laser, Yellow Jacket Concepts, and The Makerhive come together to bring you the next revolutionary break through in hot-end assembly - The Quick Clip.
Image

* No soldering
* No pin crimping
* 100% compatible with Rostock Max v3 harness wiring.
* 100% compatible with the Stock SeeMeCNC platform and arms.
* On board micro switch to manually turn off part light ring.
* Allows you to quickly swap hot-ends
* Allows for quick repairs with nothing more than a jewelers screwdriver. replace the Thermistor, the Heat cartridge, or a fan within minutes.

Top connection is an 8 pin pluggable connector compatible with the Max v3 wiring. A Hot-End, peek fan and Part fan LED. There is also a 2nd connection that breaks out the 3 wires from the Harness if not using the accelerometer board, use this connection for a prob switch or your own accelerometer. Connections on the bottom is a Spring cage connection similar to the 8 pin plug, no soldering, no pin crimping. It provides connections for a part LED light ring, The Thermistor, Hot-End, a Peek fan and 3 connections for part fans.

The Quick Clip coming soon ... and it is good.
The MakerHive
Yellow Jacket Quick Clip Plug in board
Berd-Air Cooling Kit
The MakerHive Store
Some things are meant to be closed, your mind isn't one of them.
There is a difference between what you know and what you have been told

User avatar
Glacian22
Printmaster!
Posts: 329
Joined: Thu Apr 04, 2013 6:07 am
Location: Seattle

Re: SIMPLE CONNECTOR FOR HOTEND WIRING COMING SOON

Postby Glacian22 » Sat Apr 08, 2017 1:11 am

Yes plz. :D

AlanZ
Printmaster!
Posts: 268
Joined: Mon Jan 04, 2016 8:58 pm

Re: SIMPLE CONNECTOR FOR HOTEND WIRING COMING SOON

Postby AlanZ » Sat Apr 08, 2017 10:37 am

Sign me up!

djarmag
Printmaster!
Posts: 98
Joined: Mon Jan 09, 2017 3:32 pm

Re: SIMPLE CONNECTOR FOR HOTEND WIRING COMING SOON

Postby djarmag » Mon Apr 10, 2017 12:09 pm

I was brainstorming for the longest time trying to think of how I was going to quick swap hotend setups with the accelerometer board with 713maker mount while trying to access the Bowden fitting to secure it. This takes care of both clean and Bowden access.

TAKE MY MONEY!

User avatar
Jassper
Printmaster!
Posts: 146
Joined: Wed Jul 10, 2013 10:21 pm

Re: SIMPLE CONNECTOR FOR HOTEND WIRING COMING SOON

Postby Jassper » Wed Apr 12, 2017 2:09 pm

Good to here! They should be available in about 2 weeks.

If interested, shoot me a PM and I will create a pre-oder so they ship as soon as they are ready!
The MakerHive
Yellow Jacket Quick Clip Plug in board
Berd-Air Cooling Kit
The MakerHive Store
Some things are meant to be closed, your mind isn't one of them.
There is a difference between what you know and what you have been told

User avatar
Jassper
Printmaster!
Posts: 146
Joined: Wed Jul 10, 2013 10:21 pm

Re: SIMPLE CONNECTOR FOR HOTEND WIRING COMING SOON

Postby Jassper » Sat Apr 15, 2017 12:53 am

Here is a PDF showing the pin outs.
http://www.themakerhive.com/files/YJ-QC/Pin-Out.pdf
The MakerHive
Yellow Jacket Quick Clip Plug in board
Berd-Air Cooling Kit
The MakerHive Store
Some things are meant to be closed, your mind isn't one of them.
There is a difference between what you know and what you have been told

TwoTone
Printmaster!
Posts: 139
Joined: Tue Jun 14, 2016 6:36 pm

Re: SIMPLE CONNECTOR FOR HOTEND WIRING COMING SOON

Postby TwoTone » Sat Apr 15, 2017 8:26 am

It looks really nice and I was planning on getting one, but it needs one more pair for me.
We need all the connections it currently has plus one for a IR probe.

User avatar
KAS
ULTIMATE 3D JEDDI
Posts: 1155
Joined: Thu Dec 04, 2014 6:06 pm

Re: SIMPLE CONNECTOR FOR HOTEND WIRING COMING SOON

Postby KAS » Sat Apr 15, 2017 9:02 am

TwoTone wrote:It looks really nice and I was planning on getting one, but it needs one more pair for me.
We need all the connections it currently has plus one for a IR probe.


Mentioned above in the text (There is also a 2nd connection that breaks out the 3 wires from the Harness if not using the accelerometer board, use this connection for a prob switch or your own accelerometer.)

Unless you're looking to use the accelerometer and another probe at the same time?

TwoTone
Printmaster!
Posts: 139
Joined: Tue Jun 14, 2016 6:36 pm

Re: SIMPLE CONNECTOR FOR HOTEND WIRING COMING SOON

Postby TwoTone » Sat Apr 15, 2017 9:25 pm

KAS wrote:
TwoTone wrote:It looks really nice and I was planning on getting one, but it needs one more pair for me.
We need all the connections it currently has plus one for a IR probe.


Mentioned above in the text (There is also a 2nd connection that breaks out the 3 wires from the Harness if not using the accelerometer board, use this connection for a prob switch or your own accelerometer.)

Unless you're looking to use the accelerometer and another probe at the same time?


yea I see it now, I was rushing when I looked at the pin out picture and thought the way the bottom was split matched the top.

User avatar
DeltaCon
Printmaster!
Posts: 602
Joined: Sat Nov 14, 2015 5:01 am
Location: Wessem, The Netherlands
Contact:

Re: SIMPLE CONNECTOR FOR HOTEND WIRING COMING SOON

Postby DeltaCon » Sun Apr 16, 2017 2:19 pm

KAS wrote:Unless you're looking to use the accelerometer and another probe at the same time?


At the same time seems improbable, but on different hotends you want to be able to swap out that does not seem improbable at all.
I am DeltaCon, I have a delta, my name is Con, I am definitely PRO delta! ;-)
Rostock V2 / E3D V6 / Raymond Style Heatchamber on the way!

PS.: Sorry for the avatar, that's my other hobby!

User avatar
Jassper
Printmaster!
Posts: 146
Joined: Wed Jul 10, 2013 10:21 pm

Re: SIMPLE CONNECTOR FOR HOTEND WIRING COMING SOON

Postby Jassper » Mon Apr 17, 2017 11:11 am

Yep, if your not using the HE280 accelerometer board, you can use those extra 3 for what ever you want.
The MakerHive
Yellow Jacket Quick Clip Plug in board
Berd-Air Cooling Kit
The MakerHive Store
Some things are meant to be closed, your mind isn't one of them.
There is a difference between what you know and what you have been told

User avatar
Jassper
Printmaster!
Posts: 146
Joined: Wed Jul 10, 2013 10:21 pm

Re: SIMPLE CONNECTOR FOR HOTEND WIRING COMING SOON

Postby Jassper » Mon Apr 17, 2017 6:28 pm

The MakerHive
Yellow Jacket Quick Clip Plug in board
Berd-Air Cooling Kit
The MakerHive Store
Some things are meant to be closed, your mind isn't one of them.
There is a difference between what you know and what you have been told

AlanZ
Printmaster!
Posts: 268
Joined: Mon Jan 04, 2016 8:58 pm

Re: SIMPLE CONNECTOR FOR HOTEND WIRING COMING SOON

Postby AlanZ » Mon Apr 17, 2017 8:16 pm

Order placed. Thanks Jasper.

TwoTone
Printmaster!
Posts: 139
Joined: Tue Jun 14, 2016 6:36 pm

Re: SIMPLE CONNECTOR FOR HOTEND WIRING COMING SOON

Postby TwoTone » Mon Apr 17, 2017 9:59 pm

I ordered one.
How about offering the connector for the 3 pin as well to make it simpler.

User avatar
Jassper
Printmaster!
Posts: 146
Joined: Wed Jul 10, 2013 10:21 pm

Re: SIMPLE CONNECTOR FOR HOTEND WIRING COMING SOON

Postby Jassper » Mon Apr 17, 2017 11:08 pm

TwoTone wrote:I ordered one.
How about offering the connector for the 3 pin as well to make it simpler.


Thanks for mentioning that! I'll have to update the description. The 3 pin connector comes with it. :D
The reason the 8 pin connector does not is because if you have a V3, you already have the correct connector - although it may not be the locking one. Just makes it a little cheaper for those that don't need it. I wouldn't expect people to have the 3pin one, so I include that with the board.

Thanks!
The MakerHive
Yellow Jacket Quick Clip Plug in board
Berd-Air Cooling Kit
The MakerHive Store
Some things are meant to be closed, your mind isn't one of them.
There is a difference between what you know and what you have been told

User avatar
Jassper
Printmaster!
Posts: 146
Joined: Wed Jul 10, 2013 10:21 pm

Re: SIMPLE CONNECTOR FOR HOTEND WIRING COMING SOON

Postby Jassper » Thu Apr 27, 2017 3:56 pm

The Boards have arrived, so I should be on schedule for shipping Monday May 1st!
The MakerHive
Yellow Jacket Quick Clip Plug in board
Berd-Air Cooling Kit
The MakerHive Store
Some things are meant to be closed, your mind isn't one of them.
There is a difference between what you know and what you have been told

User avatar
bvandiepenbos
Printmaster!
Posts: 927
Joined: Thu Apr 05, 2012 11:25 pm
Location: Goshen, IN
Contact:

Re: SIMPLE CONNECTOR FOR HOTEND WIRING COMING SOON

Postby bvandiepenbos » Mon May 01, 2017 12:04 pm

Got a board this past Thursday at the MakerHive.
Install was super easy... the neatest and quickest EVER! Sure is nice to not have to crimp pins or solder.
Very handy to have direct plug in compatibility with stock SeeMeCNC 8-pin plug wiring harness.
Now I can quickly swap platforms between machines. HE280 on the MAX Metal custom build, E3D platform from MAX Metal on Stock V2/v3 etc. etc.
The little switch to turn off light ring is pretty slick also.
Yellow Jacket Quick Clip rev1(01).jpg
Yellow Jacket Quick Clip rev1(02).jpg
Yellow Jacket Quick Clip rev1(03).jpg
~*Brian V.

RostockMAX v2 (Stock)
MAX METAL "ShortyMAX"
MAX METAL Rostock MAX Printer Frame
NEMESIS Air Delta v1 & v2 -Aluminum delta printers
Rostock MAX "KITT" - Tri-Force Frame
GRABER i3 "Slim"

User avatar
Glacian22
Printmaster!
Posts: 329
Joined: Thu Apr 04, 2013 6:07 am
Location: Seattle

Re: SIMPLE CONNECTOR FOR HOTEND WIRING COMING SOON

Postby Glacian22 » Wed May 03, 2017 6:41 pm

Ordered! Time to streamline the mess of connectors, I am super looking forward to getting it installed! :D

User avatar
Jassper
Printmaster!
Posts: 146
Joined: Wed Jul 10, 2013 10:21 pm

Re: SIMPLE CONNECTOR FOR HOTEND WIRING COMING SOON

Postby Jassper » Thu May 04, 2017 8:09 am

Jassper wrote:Here is a PDF showing the pin outs.
http://www.themakerhive.com/files/YJ-QC/Pin-Out.pdf


Updated pin-out sheet, minor additions.
The MakerHive
Yellow Jacket Quick Clip Plug in board
Berd-Air Cooling Kit
The MakerHive Store
Some things are meant to be closed, your mind isn't one of them.
There is a difference between what you know and what you have been told

TwoTone
Printmaster!
Posts: 139
Joined: Tue Jun 14, 2016 6:36 pm

Re: SIMPLE CONNECTOR FOR HOTEND WIRING COMING SOON

Postby TwoTone » Thu May 04, 2017 9:02 am

Excuse the ignorance on the abbreviations

SCL, SDA, INT?

User avatar
Jassper
Printmaster!
Posts: 146
Joined: Wed Jul 10, 2013 10:21 pm

Re: SIMPLE CONNECTOR FOR HOTEND WIRING COMING SOON

Postby Jassper » Thu May 04, 2017 9:25 am

TwoTone wrote:Excuse the ignorance on the abbreviations

SCL, SDA, INT?


On an I2C bus, you have the Clock line (SCL) and the Data Line (SDA). INT is Initialize.
Those 3 pins are only used on the Probe board from SeeMe, so if you are using your own hotend without the probe board, those 3 pins are open.
The MakerHive
Yellow Jacket Quick Clip Plug in board
Berd-Air Cooling Kit
The MakerHive Store
Some things are meant to be closed, your mind isn't one of them.
There is a difference between what you know and what you have been told

Eric
Printmaster!
Posts: 726
Joined: Sat Aug 18, 2012 4:09 am
Location: Chula Vista, CA

Re: SIMPLE CONNECTOR FOR HOTEND WIRING COMING SOON

Postby Eric » Thu May 04, 2017 9:55 am

Jassper wrote:
TwoTone wrote:Excuse the ignorance on the abbreviations

SCL, SDA, INT?


On an I2C bus, you have the Clock line (SCL) and the Data Line (SDA). INT is Initialize.
Those 3 pins are only used on the Probe board from SeeMe, so if you are using your own hotend without the probe board, those 3 pins are open.


Close. You swung and missed on INT, but got the rest of it right.

INT is a line from an interrupt pin on the accelerometer that's used as an dedicated output signal to indicate a probe hit. So not Initialize, but Interrupt. It has nothing to do with the I2C bus.

SCL = Serial Clock Line. SDA = Serial Data Line. These are the only two data lines associated with the I2C interface. Also known as TWI (two-wire interface). Technically a third wire (a common ground between devices) is also required for it to work.

User avatar
Jassper
Printmaster!
Posts: 146
Joined: Wed Jul 10, 2013 10:21 pm

Re: SIMPLE CONNECTOR FOR HOTEND WIRING COMING SOON

Postby Jassper » Thu May 04, 2017 10:42 am

Eric wrote:
Jassper wrote:
TwoTone wrote:Excuse the ignorance on the abbreviations

SCL, SDA, INT?


On an I2C bus, you have the Clock line (SCL) and the Data Line (SDA). INT is Initialize.
Those 3 pins are only used on the Probe board from SeeMe, so if you are using your own hotend without the probe board, those 3 pins are open.


Close. You swung and missed on INT, but got the rest of it right.

INT is a line from an interrupt pin on the accelerometer that's used as an dedicated output signal to indicate a probe hit. So not Initialize, but Interrupt. It has nothing to do with the I2C bus.

SCL = Serial Clock Line. SDA = Serial Data Line. These are the only two data lines associated with the I2C interface. Also known as TWI (two-wire interface). Technically a third wire (a common ground between devices) is also required for it to work.


You say tomato I say tamoto... :D

Thanks for the clarification. I've never use i2C so not familiar with it myself - was shooting from the hip.
The MakerHive
Yellow Jacket Quick Clip Plug in board
Berd-Air Cooling Kit
The MakerHive Store
Some things are meant to be closed, your mind isn't one of them.
There is a difference between what you know and what you have been told

AlanZ
Printmaster!
Posts: 268
Joined: Mon Jan 04, 2016 8:58 pm

Re: SIMPLE CONNECTOR FOR HOTEND WIRING COMING SOON

Postby AlanZ » Mon May 08, 2017 6:45 pm

I managed to get the new connector hooked up to a E3D-v6.

I struggled getting the wires into the holes without deforming the wires (especially 26 gauge wires) against the internal springs. I tried activating the spring release while inserting, but that was too much of a juggling act.

So I tinned the wires with a little solder and then the assembly was very quick and smooth.

TwoTone
Printmaster!
Posts: 139
Joined: Tue Jun 14, 2016 6:36 pm

Re: SIMPLE CONNECTOR FOR HOTEND WIRING COMING SOON

Postby TwoTone » Mon May 08, 2017 7:39 pm

Never put tinned wires in a spring connector.

It really wasn't hard to open the spring release


Return to “Members Marketplace”

Who is online

Users browsing this forum: No registered users and 5 guests