Search found 16 matches

by sunkenbier
Wed Feb 21, 2018 6:05 pm
Forum: Duet
Topic: Updating webcontrol issue
Replies: 3
Views: 325

Re: Updating webcontrol issue

I Was going from 18 to 19 but I resolved it in the same manner as you suggested. Thank you for the quick response.
by sunkenbier
Wed Feb 21, 2018 10:37 am
Forum: Duet
Topic: Updating webcontrol issue
Replies: 3
Views: 325

Updating webcontrol issue

Firmware Version: 1.20 (2017-12-23) WiFi Server Version: 1.20 I tried updating the DuetWebControl to the most current version and it states: Error You cannot upload web interface files as a ZIP file on a Duet WiFi! Is this normal behavior? I unzipped the files and did the upload of the unzipped file...
by sunkenbier
Fri Sep 01, 2017 11:15 am
Forum: General Tips 'N Tricks
Topic: Whip Clip Eliminator for HE280
Replies: 6
Views: 1239

Re: Whip Clip Eliminator for HE280

Jimustanguitar wrote:Yep. A pin, small screwdriver, paperclip, etc.


That's what I thought. It worked on all my other connectors but on the one that came with the prewired whip I could not get them to release. Maybe I need to hit the gym some more and get some muscles.
by sunkenbier
Thu Aug 31, 2017 8:58 pm
Forum: General Tips 'N Tricks
Topic: Whip Clip Eliminator for HE280
Replies: 6
Views: 1239

Re: Whip Clip Eliminator for HE280

How do you remove the wires from the old clip or are you just snipping them and restriping them for the new latching tab.
by sunkenbier
Mon Apr 24, 2017 10:43 am
Forum: Rostock MAX v2
Topic: Anyone out in SoCal?
Replies: 22
Views: 1959

Re: Anyone out in SoCal?

Im also in S Cal. Im just a few miles from the matter hackers store. That makes it handy for picking up filament when I dont have time to make it myself. I was on a Rostock v1 but am always doing overhauls to it. I am now running a max metal with trick trucks, I put in an accelerometer for calibrati...
by sunkenbier
Wed Apr 19, 2017 2:07 pm
Forum: Troubleshooting
Topic: Well my Rambo melted
Replies: 15
Views: 1906

Re: Well my Rambo melted

I have an identical issue occur this week. My wires were not tinned and there was no wire bits protruding that cause a short.
by sunkenbier
Fri Aug 07, 2015 12:01 pm
Forum: Troubleshooting
Topic: Is glass necessary as a print platform?
Replies: 5
Views: 491

Re: Is glass necessary as a print platform?

I have not. Are you thinking the first layer is to thin so it is sticking to well?

The material was ABS
by sunkenbier
Fri Aug 07, 2015 11:52 am
Forum: Troubleshooting
Topic: Is glass necessary as a print platform?
Replies: 5
Views: 491

Re: Is glass necessary as a print platform?

I was printing on a buildtak stuck to the glass. The print base was about 8.5 inches square and adhered to the builtak far to well.
by sunkenbier
Fri Aug 07, 2015 11:39 am
Forum: Troubleshooting
Topic: Is glass necessary as a print platform?
Replies: 5
Views: 491

Is glass necessary as a print platform?

Im printing some prints with a very large base. They are often getting stuck to the glass plate and Im unable to get them off. In yesterdays attempt the glass plate finally broke. That got me thinking. Why is a glass plate necessary? Can something like galvanized metal or copper be used? Will that c...
by sunkenbier
Wed Aug 06, 2014 6:47 pm
Forum: Troubleshooting
Topic: Rostock max hotend resetting LCD panel
Replies: 4
Views: 514

Re: Rostock max hotend resetting LCD panel

Geneb, you were right, it was a short. I resolved this long ago now but wanted anyone else encountering this issue to know what the resolution was. TY
by sunkenbier
Tue Aug 05, 2014 1:31 pm
Forum: Troubleshooting
Topic: Calibrating the print heads on a dual extruder
Replies: 2
Views: 525

Calibrating the print heads on a dual extruder

I had my rostock perfectly calibrated with one print head. Now that I have upgraded to two print heads I cannot seem to get the horizontal radius figured out. Using repetier my Y offset in the eeprom is set to 1014 steps (extr1) and -1014 (extr2). The problem Im encountering my center point is accur...
by sunkenbier
Tue Aug 05, 2014 1:14 pm
Forum: Mods and Upgrades
Topic: Dual E3D Height Adjustable Mount with Fan Shroud - STL's
Replies: 3
Views: 1300

Re: Dual E3D Height Adjustable Mount with Fan Shroud - STL's

Thank you for the part, it printed nicely and I have both my pieces mounted now. My Y offset on my rostock set in the eeprom to 1014 (extr1) and -1014 steps (extr2). Is that about what you have set? Also how did you calculate your horizontal radius. I was perfectly calibrated with a single extruder ...
by sunkenbier
Mon Nov 18, 2013 2:12 pm
Forum: Troubleshooting
Topic: Rostock max hotend resetting LCD panel
Replies: 4
Views: 514

Rostock max hotend resetting LCD panel

I just wired in a new SeeMeCNC Bowden Hotend kit, prior to this the machine was working fine. The system connects to repetier fine and runs basic functions except where the hotend is concerned. The temperature reads correctly but when I try and heat up the hotend I can see the LCD flash with two sol...
by sunkenbier
Sat Nov 09, 2013 10:32 pm
Forum: Rostock MAX
Topic: repetier looses extruder heat visibility
Replies: 2
Views: 421

Re: repetier looses extruder heat visibility

Found the issue. It was a mistype on my start g-code. I had typed G1 Z3000 F300 instead of G1 Z300 F3000. Track down where it was hanging by using the echo on.
by sunkenbier
Wed Nov 06, 2013 12:41 am
Forum: Rostock MAX
Topic: repetier looses extruder heat visibility
Replies: 2
Views: 421

repetier looses extruder heat visibility

Ive been playing with my Rostock max in repetier. When running a print job it heats the bed then it heats the extruder. I can see on the rostock lcd panel that the extruder is heating but in the repetier software it tracks the temperature for 10 to 20 degrees than just keeps that temp. The Rostock L...
by sunkenbier
Tue Jun 18, 2013 4:35 pm
Forum: Rostock MAX
Topic: Rostock MAX Assembly: Is there something I am missing?
Replies: 9
Views: 1037

Re: Rostock MAX Assembly: Is there something I am missing?

On page 58 of the doc I cannot find the 5/8" long #4 machine screws in that pic above. Man I wish the packages for the screws were labled or had numbers that the manual could refer to.

Go to advanced search