Search found 10 matches

by Turner
Thu Jul 16, 2015 4:09 pm
Forum: Development Ideas
Topic: Continuos Liquid Interface (CLIP)
Replies: 5
Views: 4300

Re: Continuos Liquid Interface (CLIP)

Here is a source for some bags that are pretty cheap, $10 for 50, and it looks like one side has no print on it. http://www.ebay.com/itm/50-7-X-10-Ultimate-Breather-Bags-KORDON-ALTERNATIVE-/301685756116?pt=LH_DefaultDomain_0&hash=item463ddf50d4" onclick="window.open(this.href);return false; I th...
by Turner
Thu Jul 16, 2015 3:21 pm
Forum: Development Ideas
Topic: Continuos Liquid Interface (CLIP)
Replies: 5
Views: 4300

Re: Continuos Liquid Interface (CLIP)

Have any of you considered trying a cheap alternative, like this? http://www.sigmaaldrich.com/catalog/product/sigma/z380059?lang=en&region=US" onclick="window.open(this.href);return false; or this? http://www.kordon.com/kordon/products/aquarium-pond-accessories-2/breathing-bags#suppliers" onclic...
by Turner
Wed Nov 20, 2013 6:32 pm
Forum: Rostock MAX
Topic: Z-Axis getting knocked off?
Replies: 5
Views: 711

Re: Z-Axis getting knocked off?

Great idea! Will do. Thanks again!
by Turner
Tue Nov 19, 2013 10:06 pm
Forum: Rostock MAX
Topic: Z-Axis getting knocked off?
Replies: 5
Views: 711

Re: Z-Axis getting knocked off?

Ah, okay! I pulled the belts off, which were all just fine, but the pulley over time slowly drifted, so the gear was not aligned with the belt completely. I straightened it out, and it works great... so far! :) Thanks for the help!

Thanks!
by Turner
Tue Nov 19, 2013 10:27 am
Forum: Rostock MAX
Topic: Z-Axis getting knocked off?
Replies: 5
Views: 711

Z-Axis getting knocked off?

Hey everybody, I've been struggling with this for a few weeks now.... My belts are all uniformly the same tension, bolts are all tight.... I am at a loss. All that I can think of is a belt is slipping? Do I need to replace some belts? Also.... is there a standard tension for the belts? I'm not sure ...
by Turner
Tue Apr 16, 2013 11:14 pm
Forum: Slic3r
Topic: Slic3r 0.9.9 vs KISSlicer?
Replies: 4
Views: 3298

Re: Slic3r 0.9.9 vs KISSlicer?

Thanks for the input! I will have to just give in and give KISSlicer a try.
by Turner
Tue Apr 16, 2013 3:07 am
Forum: Slic3r
Topic: Slic3r 0.9.9 vs KISSlicer?
Replies: 4
Views: 3298

Slic3r 0.9.9 vs KISSlicer?

I have heard from the top guys that KISSlicer is the way to go, due to illogical paths which Slic3r 0.9.8 was making. It seems like 0.9.9 completely fixed this problem, and more! I was about to install and figure out KISSlicer as a replacement, but noticed the Slic3r 0.9.9 update and installed it in...
by Turner
Mon Apr 15, 2013 10:32 pm
Forum: Troubleshooting
Topic: X-Y and Z actual movement
Replies: 3
Views: 591

Re: X-Y and Z actual movement

Oh thanks! I forgot to change that. Would changing the steps/mm motor settings be equivalent to changing that though? Or would that bypass cause additional problems?
by Turner
Sat Apr 13, 2013 2:23 pm
Forum: Troubleshooting
Topic: X-Y and Z actual movement
Replies: 3
Views: 591

X-Y and Z actual movement

Hello everybody, For my new Rostock Max (first printer!), after much trial and error, I am stumped and would appreciate any help! My X-Y movement and Z movement are not scaling correctly. I first began comparing the actual movement of the head vs what I tell it to move in Repetier. For example, I wo...
by Turner
Mon Apr 01, 2013 7:23 pm
Forum: New Member introduction
Topic: New to 3D printing- from Idaho
Replies: 0
Views: 374

New to 3D printing- from Idaho

Hello everybody! I've been watching the 3D printing market for about 3 years now, and have finally decided to make the jump into the 3D printing world as a graduation present! I graduate in a few short weeks with my BS in Mechanical Engineering. My Rostock MAX is scheduled to be here tomorrow! Being...

Go to advanced search