Search found 23 matches

by Northspire
Mon Oct 02, 2017 5:36 pm
Forum: Rostock MAX v2
Topic: extruder problems
Replies: 3
Views: 599

Re: extruder problems

I am using KISSlicer-Pro I do not see the retract settings in the options.
by Northspire
Mon Oct 02, 2017 2:01 am
Forum: Rostock MAX v2
Topic: extruder problems
Replies: 3
Views: 599

extruder problems

Hi I finally got back to working on my max v2 and I cannot seem to get it to complete a print it stops printing and chews up the filament. it starts out fine. https://i.imgur.com/dziq7sH.jpg but ends up chewing up the filament https://i.imgur.com/tx0ygGp.jpg This was supposed to be the back cover of...
by Northspire
Sun Oct 01, 2017 2:49 am
Forum: Mods and Upgrades
Topic: Bondtech Extruder Problems
Replies: 0
Views: 486

Bondtech Extruder Problems

I finally managed to get back to working on my rostock v2 and the extruder is acting weird. Here is how the filament starts out. http://i.imgur.com/dziq7sHundefined.jpg Here is how it ends up after a few minutes and it stops feeding. http://i.imgur.com/tx0ygGpundefined.jpg Any Ideas? I believe it ha...
by Northspire
Sat Apr 22, 2017 10:56 am
Forum: Duet
Topic: Bondtech Extruder Occasional Clicking
Replies: 1
Views: 596

Bondtech Extruder Occasional Clicking

ok I have finally got the printer up and running. The only lingering problem i Just can't seem to get ironed out is the extruder clicking every now and then. I included a copy of my config file. I have a Bondtech QR extruder. I have tried adjusting the steps but it didn't seem to do anything. Any Id...
by Northspire
Mon Mar 06, 2017 11:48 pm
Forum: Duet
Topic: does anybody have a starting Rostock max v2 config.g file
Replies: 3
Views: 776

Re: does anybody have a starting Rostock max v2 config.g file

ok I got it working but I can't do a auto config. The printer tries to do one but it's 6 inches above the bed and it grinds the belts so I hit the emergency stop button. Any Ideas? I do have the mini ir sensor.
by Northspire
Sat Mar 04, 2017 10:26 pm
Forum: Duet
Topic: does anybody have a starting Rostock max v2 config.g file
Replies: 3
Views: 776

does anybody have a starting Rostock max v2 config.g file

I have tried to config my v2 with the kossell file in the firmware but it tries to commit suicide. Anybody have a starting config.g file I will up load the config I am using also.
by Northspire
Sat Mar 04, 2017 10:18 pm
Forum: Duet
Topic: z axis homeing
Replies: 2
Views: 622

Re: z axis homeing

Sorry for the late reply it was a wiring issue Thanks dc42
by Northspire
Thu Feb 23, 2017 9:31 pm
Forum: Duet
Topic: z axis homeing
Replies: 2
Views: 622

z axis homeing

When I run the g code m119 it reports the x,y,and z probe as not stopped but the z axis reports max stop even if the endstop switch is unplugged. Any Ideas? Also the zstop led is not lighting up like the y and xstop led.
by Northspire
Wed Feb 08, 2017 6:30 pm
Forum: Duet
Topic: Duet 0.8 tplink 702n config problems
Replies: 5
Views: 800

Re: Duet 0.8 tplink 702n config problems

exactly. I have A Linksys wifi router connected to the internet and I want to use the tplink 702n nano router in client mode to connect the printer to the network.
by Northspire
Tue Feb 07, 2017 11:12 pm
Forum: Duet
Topic: Duet 0.8 tplink 702n config problems
Replies: 5
Views: 800

Duet 0.8 tplink 702n config problems

Hi
I am trying to configure my duet board for wifi with a tplink 702n router. I can get the router to connect to the wifi but I cannot connect to the duet. Any ideas?
by Northspire
Sat May 28, 2016 11:17 am
Forum: Rostock MAX v2
Topic: Hello I'm building a custom rostock max v2 and I need a little help.
Replies: 30
Views: 4371

Re: Hello I'm building a custom rostock max v2 and I need a little help.

I was wondering what filament the forums recommend. Is seemecnc brand any good or should I go with something else? Nothing exotic just abs and pla for now I might branch out when I get more experience.
by Northspire
Thu May 26, 2016 11:28 pm
Forum: Rostock MAX v2
Topic: Hello I'm building a custom rostock max v2 and I need a little help.
Replies: 30
Views: 4371

Re: Hello I'm building a custom rostock max v2 and I need a little help.

ok I was playing around with the placement of the power supply earlier and the fit is tight. Tight to the point I'm thinking maybe a external power supply enclosure would be a good idea. Any suggestions? by the way I have a meanwell sp 750-24
by Northspire
Wed May 25, 2016 10:22 pm
Forum: Rostock MAX v2
Topic: Hello I'm building a custom rostock max v2 and I need a little help.
Replies: 30
Views: 4371

Re: Hello I'm building a custom rostock max v2 and I need a little help.

OK I.ve got most of the base assembled now I need to figure out the best way to mount the P\S as it's not going to mount where the stock one does. Would two sided tape or some of the 3m sheet I got for the pei print surface work? I can fab something up I guess but i'm anxious to get on with the buil...
by Northspire
Thu May 19, 2016 9:59 pm
Forum: Rostock MAX v2
Topic: Hello I'm building a custom rostock max v2 and I need a little help.
Replies: 30
Views: 4371

Re: Hello I'm building a custom rostock max v2 and I need a little help.

Thanks Xenocrates. I'll let you know how it prints.
by Northspire
Tue May 17, 2016 11:23 pm
Forum: Rostock MAX v2
Topic: Hello I'm building a custom rostock max v2 and I need a little help.
Replies: 30
Views: 4371

Re: Hello I'm building a custom rostock max v2 and I need a little help.

Thanks Xenocrates. I would definitely like a shout out when you get it done. Let me know when the paneldue mount is done I have one of those to. I was gonna go pro on kisslicer anyway if for nothing else to support the dev but multicolor is definitely a bonus.
by Northspire
Sun May 15, 2016 11:44 pm
Forum: Rostock MAX v2
Topic: Hello I'm building a custom rostock max v2 and I need a little help.
Replies: 30
Views: 4371

Re: Hello I'm building a custom rostock max v2 and I need a little help.

Thank you all for the advice. It seems the general consensus is KISSlicer. Is it worth going pro,other than supporting the dev? Also would you use the web interface for the Duet or something else? Thanks again and happy printing!!!
by Northspire
Sun May 15, 2016 12:43 am
Forum: Rostock MAX v2
Topic: Hello I'm building a custom rostock max v2 and I need a little help.
Replies: 30
Views: 4371

Re: Hello I'm building a custom rostock max v2 and I need a little help.

Anybody have recommendations for slicer software?
by Northspire
Sat May 07, 2016 12:48 pm
Forum: Rostock MAX v2
Topic: Hello I'm building a custom rostock max v2 and I need a little help.
Replies: 30
Views: 4371

Re: Hello I'm building a custom rostock max v2 and I need a little help.

Yes Xeno, The part cooling multi fan mod. It looked like a good upgrade but I thought it might be too much and cool too good. The Diamond certainly looks interesting. More food for thought. Thanks Xeno for the advice on the standoffs. I emailed seemecnc and they hooked me up,FANTASTIC customer servi...
by Northspire
Wed May 04, 2016 11:18 pm
Forum: Rostock MAX v2
Topic: Hello I'm building a custom rostock max v2 and I need a little help.
Replies: 30
Views: 4371

Re: Hello I'm building a custom rostock max v2 and I need a little help.

Yeah I figured the kraken would be a lot of trouble. I'll probably go with a Chimera . How is the Diamond? Any good? Sorry for the late reply I have been slammed at work. How about the multi fan cooling mods are they worth it,or just overkill? For heating the enclosure I am thinking about something ...
by Northspire
Mon Apr 25, 2016 11:45 pm
Forum: Rostock MAX v2
Topic: Hello I'm building a custom rostock max v2 and I need a little help.
Replies: 30
Views: 4371

Re: Hello I'm building a custom rostock max v2 and I need a little help.

Thanks for the info.Xenocrates. I'm going to run the printer on 24v as all my hardware is 24v,if I have any problems I can always add another power supply and split the wiring between them. As far as the enclosure I haven't decided yet,what would you recommend? I have that exact SSR so I am set on t...
by Northspire
Sun Apr 24, 2016 9:14 pm
Forum: Rostock MAX v2
Topic: Hello I'm building a custom rostock max v2 and I need a little help.
Replies: 30
Views: 4371

Hello I'm building a custom rostock max v2 and I need a little help.

Hello all, I am building a custom rostock and I have a few questions. First off these are the mods I am going to do initially. 24V power supply LED light ring Duet control board with Paneldue Polycarbonate enclosure Mods I am considering for later Tricklaser 300mm CF Arms Tricklaser Trucks Tricklase...

Go to advanced search