Welcome to the SeeMeCNC Community

Would it be ok for me to post this piece on Thingiverse? I started printing flexible filament and this piece has helped.

The controller that the printer uses is a Geeetech GTM32.

http://www.geeetech.com/forum/viewtopic ... 13&t=17173

Geeetech has responded that firmware for it is closed source.

Anyone tried this Geeetech Rostock 301 kit? The documentation says it was released on July 7th, 2016.

http://www.ebay.com/itm/331913719972

It uses the 3-to-1 diamond nozzle.

thedoble wrote:

What did you use to generate this image?

I was able to get the RAMPs 1.4 working with the CNC Shield. It adds four extruders. I was trying to get it working with a Diamond 3 to 1 nozzle but haven't had much time.

Option for e3d v6 w/ volcano hot end. Option for auto bed leveling.

I purchased the Folger Tech metal framed i3 Prusa kit for 299 (b-day gift). My son wanted to get into 3d printing so we picked up the kit to get his feet wet. He's not one to tinker with stuff like this, so we'll see how he handles the assembly. As for the parts kit, it looks decent enough. Verifie...

Repetier-Host will pause if you add @pause to the gcode. You can swap the filament while it's paused and then resume the print.

what's fpv?

The E-Sun black filament from microcenter is between matte and glossy. It smells a little like ABS for some reason.

Anyone know the name of this plugin for Cura?

The fans are mounted. I need to improve the mount for the servo. The bed is too out of level and the plastic is leaking from the heat breaks

Renha wrote:Like this one there viewtopic.php?f=59&t=8069&start=25

Thanks, but i'm using the cheap e3d clone heatsinks that aren't the same size.

Rather than three fans, what about running a fan to blow down between all three, together with some kind of deflection cone/shroud which directs the air across the heatsinks and away from the nozzle? That's a good idea and that's what the creators of the diamond nozzle recommend. Like this: m The h...

Some photos of a fan mount. I'm thinking of doing three 40 mm fans.

I was able to get it working using this firmware.

http://www.jbcse.com/Folgertech_Kossel_Firmware(V2)_smaller_pulley_diamond_nozzle.zip

I found a way to mount it using a single rubber band.

I'm trying to get a diamond nozzle working with a Kossel 2020 (delta). The firmware it currently has is Marlin. RAMPS 1.4 has room for two extruders. I added a third extruder using the GRBL / CNC Shield. This is the wiring: m I tried this firmware that is designed for multiple extruders and single n...

Here are some specialty filaments made of metal powder: http://www.proto-pasta.com/collections/retail

Jesse, were you able to get yours operational? Jesse's Diamond had an interference problem between the ribbed cold end and the heater cartridge. He mailed it to me and I machined the bottom several fins on an angle so they would clear. Anyone else have this problem? Not yet. I'm going to try to mou...

How did you win it?

i've done some printing jobs on makexyz.com.

http://www.makexyz.com/printer/jesse

rabbit wrote:thx so much...
did you already try the volcano? does it really boost your print time?
you guys from seemecnc should think about a modular kit. where the buyer can choose which hotend etc he wants in his. that would be great.

Max print speed is 50% to 100% faster.

The nozzle must be firmly pressed against the steel heatbreak. If plastic oozes between the heat break and the nozzle, it will jam. Pull off the nozzle while everything is hot. Take the PTFE tube out. Cut a 1 foot section of filament and shove it in from the top and bottom. If the filament doesn't m...