Search found 4679 matches

by geneb
Tue Oct 16, 2018 8:35 am
Forum: Troubleshooting
Topic: Hotend never reaches Temp
Replies: 10
Views: 375

Re: Hotend never reaches Temp

What temp are you setting? How close does it get? Have you contacted support about this?

g.
by geneb
Mon Oct 15, 2018 8:41 am
Forum: Troubleshooting
Topic: Not sure what setting is causing these errors
Replies: 2
Views: 39

Re: Not sure what setting is causing these errors

You should tell S3D to lift the nozzle on travel moves. I'm not sure what effect the z-offset you have actually has.

It also appears that you're printing at too high a temp - are the cooling fans running during the print?

g.
by geneb
Thu Oct 11, 2018 10:02 am
Forum: New Member introduction
Topic: Fresh off the block
Replies: 2
Views: 104

Re: Fresh off the block

Unless you've got a specific requirement for the properties of ABS, you might be better off working with PLA. It's a lot more friendly to newcomers.

g.
by geneb
Wed Oct 10, 2018 7:32 am
Forum: Other
Topic: CURA
Replies: 6
Views: 103

Re: CURA

The only network connectivity that I'm aware of is provided by plug-ins like the one that allows you to send print jobs straight from Cura to Duet-equipped printers. There's no monitoring feature though - it would be kind of silly in the face of what you get out of the default web interface on the D...
by geneb
Tue Oct 09, 2018 8:33 am
Forum: Other
Topic: CURA
Replies: 6
Views: 103

Re: CURA

That feature is only for printers that Cura knows how to talk to over USB.

g.
by geneb
Fri Oct 05, 2018 9:01 am
Forum: Artemis
Topic: Help with blobbing issue
Replies: 2
Views: 112

Re: Help with blobbing issue

Try backing down the temperature a bit. It also looks like there's a lot of moisture in your ABS.

g.
by geneb
Thu Oct 04, 2018 9:12 am
Forum: Troubleshooting
Topic: ABS clyinders look like hour glass
Replies: 1
Views: 66

Re: ABS clyinders look like hour glass

You need to enclose the printer - moving air is causing the problem. Even walking by the printer can ruin an ABS print.

g.
by geneb
Wed Oct 03, 2018 8:42 am
Forum: Troubleshooting
Topic: EZStruder stops feeding on retraction
Replies: 7
Views: 326

Re: EZStruder stops feeding on retraction

Have you contacted support yet? You're likely to get a solution pretty quickly. :)

g.
by geneb
Sun Sep 30, 2018 11:01 am
Forum: Troubleshooting
Topic: Recent 3.2 upgrade now HeatSink fan not working
Replies: 1
Views: 62

Re: Recent 3.2 upgrade now HeatSink fan not working

If you're referring to the heat sink fan for the hot end, it won't turn on until the hot end hits about 45-60C or so.

g.
by geneb
Sat Sep 29, 2018 9:56 am
Forum: Rostock MAX v2
Topic: Replacement Carriages
Replies: 5
Views: 543

Re: Replacement Carriages

MrScott, Are you referring to the delrin bearing covers?

g.
by geneb
Thu Sep 27, 2018 9:08 am
Forum: Artemis
Topic: When (& how) to update firmware.
Replies: 4
Views: 202

Re: When (& how) to update firmware.

If you want to know the why of a change, email support. I'm sure they'd be happy to tell you.

g.
by geneb
Mon Sep 24, 2018 9:11 am
Forum: Artemis
Topic: When (& how) to update firmware.
Replies: 4
Views: 202

Re: When (& how) to update firmware.

Keep in mind that those aren't firmware updates - they're configuration file updates. You can take a look at the "diff" for the changed files in order to see what they changed and then decide if you want those changes.

g.
by geneb
Fri Sep 21, 2018 9:17 am
Forum: Troubleshooting
Topic: EZStruder stops feeding on retraction
Replies: 7
Views: 326

Re: EZStruder stops feeding on retraction

You might want to check the extruder stepper wiring to make sure one of the connector pins isn't working out of the shell.

g.
by geneb
Fri Sep 21, 2018 9:16 am
Forum: Simplify3D
Topic: Rostock MAX v3.2 Settings
Replies: 3
Views: 353

Re: Rostock MAX v3.2 Settings

Keep in mind that stringing is going to vary from roll to roll.

g.
by geneb
Tue Sep 18, 2018 8:53 am
Forum: RailCore
Topic: State of the Printer
Replies: 7
Views: 904

Re: State of the Printer

Windshadow, the 3.2 upgrade will blow your mind. :)

g.
by geneb
Tue Sep 18, 2018 8:51 am
Forum: Troubleshooting
Topic: Rostock Max v3 Stops Moving after a while
Replies: 12
Views: 347

Re: Rostock Max v3 Stops Moving after a while

If the HE280 comes unplugged it can crash the RAMBo.

The 3.2 upgrade is a whole new ballgame - the Duet & SD300 are a perfect combination.

g.
by geneb
Sat Sep 15, 2018 11:43 am
Forum: Rostock MAX v3.2
Topic: Simplify3D profile for stock Rostock MAX v3.2?
Replies: 8
Views: 464

Re: Simplify3D profile for stock Rostock MAX v3.2?

You're welcome!

g.
by geneb
Fri Sep 14, 2018 8:09 am
Forum: Troubleshooting
Topic: Temp Undefined, possible broken heater for HE280
Replies: 23
Views: 359

Re: Temp Undefined, possible broken heater for HE280

Well with electronics like the RAMBo, you can get a false "good" check if you test it in circuit, so "meh" yourself.

g.
by geneb
Fri Sep 14, 2018 8:05 am
Forum: Rostock MAX v3.2
Topic: Simplify3D profile for stock Rostock MAX v3.2?
Replies: 8
Views: 464

Re: Simplify3D profile for stock Rostock MAX v3.2?

The attached is for the Artemis, but it should work fine on the 3.2. Jim Carter built it.
Artemis.txt
(11.63 KiB) Downloaded 10 times


You'll need to change the extension from "txt" to "fff".

g.
by geneb
Thu Sep 13, 2018 8:40 am
Forum: Troubleshooting
Topic: Temp Undefined, possible broken heater for HE280
Replies: 23
Views: 359

Re: Temp Undefined, possible broken heater for HE280

...and do NOT test fuses in-circuit. Remove them first. :)

g.
by geneb
Wed Sep 12, 2018 8:15 am
Forum: Troubleshooting
Topic: Temp Undefined, possible broken heater for HE280
Replies: 23
Views: 359

Re: Temp Undefined, possible broken heater for HE280

Check the terminal blocks on the RAMBo to make sure you don't have any "cooked" terminals. When you turn the hot end on, check the hot end terminals on the RAMBo to make sure you see 12v there as it heats up. If you've got a v3 with the single-rail power supply (not ATX), you can bump the ...
by geneb
Tue Sep 11, 2018 5:07 pm
Forum: Troubleshooting
Topic: Error compiling for board RAMBo
Replies: 5
Views: 181

Re: Error compiling for board RAMBo

\o/
by geneb
Tue Sep 11, 2018 10:12 am
Forum: Troubleshooting
Topic: Error compiling for board RAMBo
Replies: 5
Views: 181

Re: Error compiling for board RAMBo

You need to use the 1.6.0 version of the Arduino IDE.

g.
by geneb
Fri Sep 07, 2018 7:59 am
Forum: New Member introduction
Topic: Greetings from Alaska!
Replies: 2
Views: 253

Re: Greetings from Alaska!

Welcome to the zoo! There's a couple of dinosaurs that live in that neck of the woods that are pretty good printer builders. ;)

g.
by geneb
Mon Sep 03, 2018 11:33 am
Forum: Rostock MAX v3
Topic: Tech Support Needed on Z-Probe Always Triggered
Replies: 6
Views: 233

Re: Tech Support Needed on Z-Probe Always Triggered

I would open a support ticket - there might indeed be something wobbly with the SE300 board.

g.

Go to advanced search