Search found 166 matches

by duvdev
Sat Jan 28, 2017 1:58 pm
Forum: Troubleshooting
Topic: pause and resume print
Replies: 1
Views: 203

pause and resume print

Hi all

from time to time I need to pause the printer and load a new spool.
the problem is that 4 out of 5 times the pause option will stop the print- some times it wont home and will start to print in the air.

is there a problem with the pause option?

thanks
by duvdev
Fri Jan 20, 2017 6:13 am
Forum: Troubleshooting
Topic: Octopi and remote connection
Replies: 3
Views: 332

Octopi and remote connection

Hi all So I installed the octoprint on my pi3 connected to the printer and a USB camera. but I need to know: 1. can I connect to it from my mobile phone? how? do I have to get a static IP? 2 I saw that there is a plugin to calibrate the printer ( I have a V2 upgraded with calibration board ) how can...
by duvdev
Thu Jan 19, 2017 11:28 am
Forum: Rostock MAX v3
Topic: Rostock Max v3 upgrading to e3d v6 hot end?
Replies: 25
Views: 4657

Re: Rostock Max v3 upgrading to e3d v6 hot end?

I have the same setup. E3d v6 with 713 plate but I can't find a good layer fan for it.
Can some one help?
by duvdev
Thu Dec 15, 2016 8:46 am
Forum: General Tips 'N Tricks
Topic: Octoprint control?
Replies: 4
Views: 312

Octoprint control?

Can I use one repsberry pi 3 to control 4 printers?
by duvdev
Tue Nov 29, 2016 8:36 am
Forum: Troubleshooting
Topic: max v2 with probing board
Replies: 5
Views: 465

Re: max v2 with probing board

Thanks, that was the problem.
by duvdev
Sun Nov 27, 2016 9:17 am
Forum: Troubleshooting
Topic: max v2 with probing board
Replies: 5
Views: 465

Re: max v2 with probing board

but it I turn it off and on the screen will be OK
by duvdev
Sun Nov 27, 2016 8:06 am
Forum: Troubleshooting
Topic: max v2 with probing board
Replies: 5
Views: 465

max v2 with probing board

Hi all, I upgraded one of my v2 printers with new probing board ( with e3d v6 hot end) and it all works OK but I have done 2 long prints ~20 hours and when I came to see it after about 15 or 16 hours it was still printing ok but the screen is all empty and no display at all ( blue light is on ). the...
by duvdev
Wed Nov 23, 2016 4:14 pm
Forum: Development Topics
Topic: 20161123 dev firmware
Replies: 16
Views: 1366

Re: 20161123 dev firmware

That is Cool. Will that it soon.
If I have a max v2 with probing board what are the correct values for printer and Power supply?
by duvdev
Mon Nov 14, 2016 3:07 am
Forum: Rostock MAX v3
Topic: P003A HE280 [Solved?] Auto Leveling Issue/Bed Leveling Issue/Calibration
Replies: 134
Views: 7569

Re: P003A HE280 [Solved?] Auto Leveling Issue/Bed Leveling Issue/Calibration

What id the status of the new firmware fix?
I have the same problem in 3 printers
by duvdev
Wed Oct 26, 2016 5:09 am
Forum: Rostock MAX v3
Topic: Part fan modification for tight enclosure
Replies: 23
Views: 2568

Re: Part fan modification for tight enclosure

I love it but can you please mod it to fit the 713 parts?
by duvdev
Tue Oct 25, 2016 4:23 am
Forum: Rostock MAX v3
Topic: Part fan modification for tight enclosure
Replies: 23
Views: 2568

Re: Part fan modification for tight enclosure

cool design.

can you please upload an open file so I can change it a bit?
by duvdev
Mon Oct 24, 2016 1:50 am
Forum: Troubleshooting
Topic: Chipped Boro?
Replies: 4
Views: 236

Re: Chipped Boro?

You are using PEI with abs juice?
by duvdev
Sun Oct 16, 2016 7:20 pm
Forum: Filament
Topic: PLA - Commercial use?
Replies: 5
Views: 468

Re: PLA - Commercial use?

Pla will get soft at 55 - 60 deg C so parts for car use in the summer won't be a good if they made from pla.

ABS is the good choice as all the plastic in the car is made from abs like AC outlets.
by duvdev
Fri Oct 14, 2016 6:34 am
Forum: Rostock MAX v3
Topic: Rostock Max v3 calibrating script.
Replies: 37
Views: 5190

Re: Rostock Max v3 calibrating script.

Hi

finally got it going.

what is the difference between that script and the full calibration from UI menu?
by duvdev
Thu Oct 13, 2016 2:18 pm
Forum: Mods and Upgrades
Topic: Interfacing to the new HE280 accelerometer...
Replies: 130
Views: 6372

Re: Interfacing to the new HE280 accelerometer...

Nice. Looks good.
BTW, mhackney I sent you a PM.
by duvdev
Wed Oct 12, 2016 10:44 am
Forum: Troubleshooting
Topic: new probing board problem
Replies: 0
Views: 197

new probing board problem

Hi, So I finished upgrading my v2 to the new probing board. I installed the board with the e3d v6 hot end. after updating the firmware when I turn the printer on is stuck on the splash screen. I I disconnect the I2C connector it will start up hust fine and i can home and heat the bed and all just li...
by duvdev
Wed Oct 12, 2016 12:23 am
Forum: Troubleshooting
Topic: 5v to the accle board
Replies: 1
Views: 180

5v to the accle board

Hi all,

I saw that the board get 5v from ps-on.
I have my v2 printer with all the wires in place but no wire to the ps-on. Can I deliver the 5v from different location and not the ps-on?

Thanks
by duvdev
Tue Oct 11, 2016 1:57 pm
Forum: Rostock MAX v3
Topic: Led light ring powered off the accelerometer board?
Replies: 8
Views: 963

Re: Led light ring powered off the accelerometer board?

What is the diameter if the led ring?
by duvdev
Mon Oct 10, 2016 12:09 pm
Forum: RAMBo
Topic: PS_ON ??
Replies: 7
Views: 842

Re: PS_ON ??

Hi

I am using the PS on to control the heat lamp inside the printer with ssr.
how can I install the board? where can I connect the 5v cable to?
by duvdev
Mon Oct 10, 2016 11:50 am
Forum: Mods and Upgrades
Topic: I will have a long weekend...
Replies: 2
Views: 304

I will have a long weekend...

just got all the parts from seemecnc. 4 printers to upgrade and the 5 more...

I am waiting for 713maker parts.

Image
by duvdev
Mon Oct 10, 2016 11:28 am
Forum: Troubleshooting
Topic: Print Quality ABS 0.1mm
Replies: 9
Views: 490

Re: Print Quality ABS 0.1mm

top/bottom solid layer 6 (count) and 20 % infill that is the problem.

when I print at 0.1 mm with 20 % infill I use min 8 layers at the top of the infill
by duvdev
Fri Sep 30, 2016 2:47 am
Forum: General Tips 'N Tricks
Topic: Is PEI that good?
Replies: 11
Views: 832

Re: Is PEI that good?

Wow thanks for the details answers.
Why do I have to sand the PEI?
by duvdev
Thu Sep 29, 2016 11:58 pm
Forum: General Tips 'N Tricks
Topic: Is PEI that good?
Replies: 11
Views: 832

Is PEI that good?

Hi all, I have been printing with my all my max v2 printers for 2 years and I long time ago I ordered round 4 PEI sheets with the M3 glue on then. I print a lot with ABS, Polycarbonate and nylon and I want to know if the PEI is really that good. I now have some time to installed it, any tips? After ...
by duvdev
Tue Sep 27, 2016 11:38 pm
Forum: The Build Zone
Topic: mhackney's Real V3 Build Thread
Replies: 165
Views: 11706

Re: mhackney's Real V3 Build Thread

Can you do it sls from smart phone when you are away from the printer? At least monitoring and streaming?
by duvdev
Mon Sep 26, 2016 12:17 pm
Forum: Rostock MAX v3
Topic: Part fan modification for tight enclosure
Replies: 23
Views: 2568

Re: Part fan modification for tight enclosure

Cool.

Can you share the file?

Go to advanced search