Search found 1328 matches

by Mac The Knife
Mon Jul 16, 2018 7:57 am
Forum: Troubleshooting
Topic: Retraction: high pitched motor
Replies: 1
Views: 72

Re: Retraction: high pitched motor

Let's start with what are your current retraction settings?
by Mac The Knife
Tue Jul 03, 2018 7:26 am
Forum: Troubleshooting
Topic: Print failure when printing vertical columns?
Replies: 12
Views: 367

Re: Print failure when printing vertical columns?

I would try printing with a brim attached to the print,,, possibly as high as 3 layer thick.
by Mac The Knife
Thu Jun 28, 2018 7:16 pm
Forum: Troubleshooting
Topic: Hotend never reaches Temp
Replies: 8
Views: 241

Re: Hotend never reaches Temp

Gene has a video on youtube showing how to replace the resistors with a heater cartridge in the hotend. Myself, I installed two,,,,, to keep the hater block balanced.
by Mac The Knife
Thu Jun 28, 2018 7:40 am
Forum: Troubleshooting
Topic: Hotend never reaches Temp
Replies: 8
Views: 241

Re: Hotend never reaches Temp

I was going to post that that you need to tighten the power supply connections at the RamBo, but you say you've already done that.
by Mac The Knife
Thu Jun 14, 2018 12:13 pm
Forum: Troubleshooting
Topic: Filament Feeding Problem
Replies: 5
Views: 254

Re: Filament Feeding Problem

A new hotend? And after you installed a new hotend you started to have a problem?
by Mac The Knife
Sat Jun 09, 2018 10:46 am
Forum: Troubleshooting
Topic: can not connect to printer
Replies: 4
Views: 207

Re: can not connect to printer

It appears that there is more traffic by SeeMeCNC people on their Facebook page than there is here. You might get a faster response there.
by Mac The Knife
Fri Jun 01, 2018 1:11 pm
Forum: What are YOU making?
Topic: Coming soon from 713Maker.com
Replies: 65
Views: 8440

Re: Coming soon from 713Maker.com

Nice looking storefront. Except for the "Currently out of stock" items!!!!!
by Mac The Knife
Fri Jun 01, 2018 11:32 am
Forum: What are YOU making?
Topic: Coming soon from 713Maker.com
Replies: 65
Views: 8440

Re: Coming soon from 713Maker.com

I sent a request in for a bed platform for my Folgertech FT-5 R2, a month ago, and haven't heard anything back.
by Mac The Knife
Wed May 30, 2018 7:26 am
Forum: Nuts and Bolts
Topic: What is in your tool chest?
Replies: 3
Views: 1331

Re: What is in your tool chest?

I bought the IWISS 28B, Ratcheting crimpers off of Amazon. They work really well. http://a.co/jiewv7g
by Mac The Knife
Fri May 25, 2018 8:02 am
Forum: Troubleshooting
Topic: ERIS - Clicking Sound, No Filament Coming Out, Unload Doesn't Work :(
Replies: 8
Views: 341

Re: ERIS - Clicking Sound, No Filament Coming Out, Unload Doesn't Work :(

I've had to trim the end of the ptfe back a little bit so that the connector would have fresh material to bite into, otherwise I would have a hockey puck form causing my jam. I use a heat break from my V2 hotend, and a razor blade to trim the tube square so it seals.
by Mac The Knife
Wed May 16, 2018 7:39 am
Forum: What are YOU making?
Topic: Tiny Track - FPV RC
Replies: 3
Views: 359

Re: Tiny Track - FPV RC

No, there isn't, but installing a new hotend isn't hard,,, That is if you're installing a stock hotend.
by Mac The Knife
Fri Apr 27, 2018 8:32 am
Forum: GCode & Test Prints
Topic: GCode for Cyclops Dual Extruders
Replies: 6
Views: 1170

Re: GCode for Cyclops Dual Extruders

Even better, your question is looks to be better suited in the Ramps section of the forum,,,, viewforum.php?f=30
by Mac The Knife
Wed Apr 18, 2018 12:28 pm
Forum: RailCore
Topic: Duet 2 Maestro
Replies: 7
Views: 609

Re: Duet 2 Maestro

My take away from watching that clip is that it will not perform the same as the Duet 2, and tailored more for the OEMs,,, But I nominate you to get back with us on your impressions. The Duet 3 on the other hand,,,,,
by Mac The Knife
Wed Apr 18, 2018 12:17 pm
Forum: The Build Zone
Topic: Converting MAX v3 to ATX PSU
Replies: 6
Views: 622

Re: Converting MAX v3 to ATX PSU

My opinion would be that it would be easier to change the fan in the existing power supply.
by Mac The Knife
Thu Apr 05, 2018 8:18 am
Forum: New Member introduction
Topic: New to 3D printing and need help
Replies: 10
Views: 636

Re: New to 3D printing and need help

For print leveling to work, the controller needs to have a sensor to notify it that the nozzle has touched the bed. What you show does not have a sensor. The Arms the previous owner put on appear to be by Trick Laser. He shows 300 mm for the arms he currently sells,,,, You have the old style, but th...
by Mac The Knife
Wed Apr 04, 2018 7:24 am
Forum: New Member introduction
Topic: New to 3D printing and need help
Replies: 10
Views: 636

Re: New to 3D printing and need help

Unless the previous owner added a sensor of some sorts, print leveling will not work,,, and you would have to adjust it manually. Post some pictures, it may help identify what you got there.
by Mac The Knife
Tue Apr 03, 2018 8:04 am
Forum: RailCore
Topic: How to Rebuild Linear Rails
Replies: 10
Views: 1150

Re: How to Rebuild Linear Rails

McMaster-Carr, One stop shopping and I can get it next day.
by Mac The Knife
Sun Apr 01, 2018 10:11 am
Forum: RailCore
Topic: How to Rebuild Linear Rails
Replies: 10
Views: 1150

Re: How to Rebuild Linear Rails

McMaster-Carr has a decent selection of 3/32 balls, Steel, Stainless, Carbide, and Ceramic. The last two are rally expensive,,,, almost 9 bucks for 5 balls.
by Mac The Knife
Thu Mar 01, 2018 6:49 pm
Forum: ERIS Delta
Topic: Discontinued???
Replies: 7
Views: 2503

Re: Discontinued???

Here's the picture for the springs,,,, see my other thread for the McMaster-Carr part number,,,, and I had to snip the ends to change them from a loop, to a hook. Also attached is the eeprom file,,,,, I think that's where I made the changes for the auto calibration? change .txt, to .epr when you dow...
by Mac The Knife
Thu Mar 01, 2018 6:43 pm
Forum: ERIS Delta
Topic: Discontinued???
Replies: 7
Views: 2503

Re: Discontinued???

Switching from the RamBo to the Duet for the big printers, prolly stubbed someone's toes,,, and perhaps minimized the price break SeeMeCNC got for the Mini RamBo. DC42 will just have to come up with a mini Duet,,,, or just run the Eris on an umbilical cord from a controller brick,,,,, put the powers...
by Mac The Knife
Thu Mar 01, 2018 8:01 am
Forum: ERIS Delta
Topic: Discontinued???
Replies: 7
Views: 2503

Re: Discontinued???

I'll post up a picture of them tonight. And I'll try and find my firmware file for it as well. Once I took out the slop with the springs, I had to make some changes, I think to the sensor sensitivity?, so that the auto calibration worked.
by Mac The Knife
Tue Feb 27, 2018 12:19 pm
Forum: Hacker Series - H2
Topic: print problem, printing a spinning top with tower top, tower comes out wrong
Replies: 7
Views: 851

Re: print problem, printing a spinning top with tower top, tower comes out wrong

The printer needs to slow down when in is printing that detail. Or you need more cooling
by Mac The Knife
Sun Feb 25, 2018 10:06 am
Forum: Troubleshooting
Topic: EZstruder "backslip" problem?
Replies: 15
Views: 787

Re: EZstruder "backslip" problem?

This all started with a "new" spool of filament? Under extruding, and skipping,,,, Have you compared the diameter of the filament with the old spool??

If the only thing changed was the spool, and the machine checks out, I'd be looking at that spool.
by Mac The Knife
Tue Feb 20, 2018 5:17 pm
Forum: The Lounge
Topic: Do you earn significant money with 3D printing?
Replies: 11
Views: 1988

Re: Do you earn significant money with 3D printing?

It's like a black hole for my budget, every time I decide to make some money, I do exactly the opposite like buying second Prusa or going to purchase 3D scanner now... Something wrong with me :) At least I managed to return the invested funds for my Artec scanner :roll: How is that scanner working ...
by Mac The Knife
Mon Feb 19, 2018 12:23 pm
Forum: What are YOU making?
Topic: Anniversary lamp for my sweetie
Replies: 16
Views: 1028

Re: Anniversary lamp for my sweetie

Then Prove it is real, Post a 360-Degree Video with no breaks of pauses. No Video then it is a FAKE. Been listening to FAKE NEWS FOR SO LONG GETTING TIRED OF IT. There's this thing called "Google", as a Technician / Programmer / IT guy, you may have heard of it? There's a ton of informati...

Go to advanced search