Search found 659 matches

by Tincho85
Sat Dec 23, 2017 12:43 am
Forum: Artemis
Topic: The Artemis arrives in NJ
Replies: 31
Views: 1885

Re: The Artemis arrives in NJ

Very nice printer, well done SeeMeCNC and congratulations to AlanZ. I'm a bit jealous :P
Regarding your motor problem, what does it happen if you take the motor off of the extruder? it still "flutters"?
by Tincho85
Sat Dec 09, 2017 9:20 am
Forum: Troubleshooting
Topic: V2 Firmware Questions
Replies: 5
Views: 691

Re: V2 Firmware Questions

Sorry Bob, by MC I meant Matter Control. If you have the printer connected to a host program, Arduino IDE won't work.
I'm glad it's working now, happy to help.
by Tincho85
Fri Dec 08, 2017 9:43 am
Forum: Troubleshooting
Topic: V2 Firmware Questions
Replies: 5
Views: 691

Re: V2 Firmware Questions

Also, if you get "Access denied". Make sure to disconnect Repetier Host, MC or any other control program from the board.
by Tincho85
Fri Dec 08, 2017 9:35 am
Forum: Troubleshooting
Topic: V2 Firmware Questions
Replies: 5
Views: 691

Re: V2 Firmware Questions

If you want to heat above 240ºc then change these lines:

Code: Select all

#define MAXTEMP 290
#define MIN_DEFECT_TEMPERATURE -10
#define MAX_DEFECT_TEMPERATURE 300
#define UI_SET_MAX_EXTRUDER_TEMP 290


As for the error, you could try with an older version of Arduino IDE, 1.6.0 always worked for me.
by Tincho85
Sun Dec 03, 2017 1:45 pm
Forum: Troubleshooting
Topic: Heavy stringing between parts
Replies: 3
Views: 510

Re: Heavy stringing between parts

Is the same with a lower retraction speed? 20mm/s like default?
Have you tried with a layer cooling fan?
by Tincho85
Thu Nov 23, 2017 5:33 pm
Forum: The Lounge
Topic: ARTEMIS
Replies: 18
Views: 1907

Re: ARTEMIS

Woaaa nice! 24v system, Duet, AC Bed, Rails, huge printable area, this is awesome. https://www.seemecnc.com/collections/3d-printers/products/artemis-300 Good job guys. One thing, please don't take it wrong, the web page needs far more love. Too few pictures of the printers you are selling and poorly...
by Tincho85
Fri Oct 13, 2017 8:00 am
Forum: Troubleshooting
Topic: Sudden Layer Shift
Replies: 10
Views: 1140

Re: Sudden Layer Shift

Can't see the last pic.
by Tincho85
Sat Sep 23, 2017 9:32 am
Forum: The Lounge
Topic: The best channel on YouTube: AvE, the Canadian machinist
Replies: 5
Views: 1932

Re: The best channel on YouTube: AvE, the Canadian machinist

+1 now.
I'm watching the bread forge atm and already love him.

With the "Keep ya dick in a vice" he bought my subscription.
by Tincho85
Thu Sep 21, 2017 6:46 pm
Forum: Troubleshooting
Topic: Molten Terminal Duet
Replies: 9
Views: 1272

Re: Molten Terminal Duet

Why did it melt? Are you runing the onyx at 24v?
Edit. Oh ive just read that one wire was loose.
by Tincho85
Thu Sep 21, 2017 6:42 pm
Forum: The Lounge
Topic: Where is Tincho85
Replies: 1
Views: 641

Re: Where is Tincho85

Hello Joe!!! Thanks for asking. Missed me? :P
I was entering the forum at regular basis, but didn't log in.

I'm currently building a CoreXY printer and tinkering with the MPCNC.
With the Duet + Titan Aero the Rostock Max works like charm.
by Tincho85
Sun Jul 30, 2017 3:37 pm
Forum: New Member introduction
Topic: Hello from Spain!
Replies: 7
Views: 1324

Re: Hello from Spain!

Hello and welcome!!! I'm half Spanish here :P My dad is from Guernica.
The 24v bed upgrade is one of the best mods you can give to your Rostock Max.

Have fun and happy printing.
by Tincho85
Thu Jul 20, 2017 3:44 pm
Forum: Troubleshooting
Topic: Calibration problems for a big print, Please Help!!!
Replies: 3
Views: 559

Re: Calibration problems for a big print, Please Help!!!

Another option is to change the "Z max length" though EEPROM.
In order to lower the nozzle, you increase this value (with a bigger z length the printer thinks it has more room to move down).
To raise the nozzle, you decrease it.
by Tincho85
Thu Jul 20, 2017 11:50 am
Forum: Troubleshooting
Topic: Calibration problems for a big print, Please Help!!!
Replies: 3
Views: 559

Re: Calibration problems for a big print, Please Help!!!

Hi, my biggest recommendation would be to get an aluminum heat spreader, like this one: http://www.tricklaser.com/Heat-Spreader-for-Onyx-310-Bed-RM-HEATSPR-ONYX.htm and a PEI top surface: http://forum.seemecnc.com/viewtopic.php?t=7452 But for now, you can try this: * For PLA, I used to print it very...
by Tincho85
Mon Jul 17, 2017 7:26 pm
Forum: Troubleshooting
Topic: H2 Build.. First layer uneven
Replies: 4
Views: 544

Re: H2 Build.. First layer uneven

Now it hits me... It's just a leveling issue. The nozzle is too far when printing close to the Z axis.
Does the H2 has a screw that you can screw/unscrew in order to level that particular axis?
by Tincho85
Mon Jul 17, 2017 7:22 pm
Forum: Troubleshooting
Topic: Top layer not closing
Replies: 9
Views: 1130

Re: Top layer not closing

Do you get the same results with a different slicer?
by Tincho85
Sat Jul 15, 2017 2:07 pm
Forum: Troubleshooting
Topic: Top layer not closing
Replies: 9
Views: 1130

Re: Top layer not closing

Is it because of the camera lens or the centers of the tapered cube are inflated?
by Tincho85
Sat Jul 15, 2017 2:02 pm
Forum: Troubleshooting
Topic: H2 Build.. First layer uneven
Replies: 4
Views: 544

Re: H2 Build.. First layer uneven

Hi, I can't contribute with the autocal apsect as I don't have the accelerometer board. But it could be tower lean.
Check the towers with a digital inclinometer or a good machinists square.
by Tincho85
Fri Jul 14, 2017 2:56 pm
Forum: General Tips 'N Tricks
Topic: Best way to Print with Rostock Max 2
Replies: 6
Views: 1094

Re: Best way to Print with Rostock Max 2

Hi, don't sell it, the learning curve is priceless. Yes, you are having some headaches and you will have more. But you built it!, and eventually you will diagnose it better than anyone else here. If you sell it just to get a plug n play printer, be sure that problems will come with that one too, but...
by Tincho85
Fri Jul 14, 2017 2:29 pm
Forum: What are YOU making?
Topic: Coming soon from 713Maker.com
Replies: 65
Views: 8733

Re: Coming soon from 713Maker.com

Those pictures... That's like porn to me.

Joke aside, very nice looking parts Matthew.
Well done.
by Tincho85
Thu Jul 13, 2017 5:18 pm
Forum: Troubleshooting
Topic: Hotend won't stay above 240 and goes to DEF
Replies: 6
Views: 817

Re: Hotend won't stay above 240 and goes to DEF

Hi, it could also be a wiring issue or a psu gone rogue.

Grab a multimeter and check the voltage.
Measure hotend and bed before and after you start the print.


Best of luck
Martin
by Tincho85
Wed Jul 12, 2017 11:10 pm
Forum: Troubleshooting
Topic: PLA woes (stringing)
Replies: 7
Views: 898

Re: PLA woes (stringing)

The minimum retract distance at 5mm means it'll have to print 5mm before it even attempts a retract, you can try making this distance much smaller 1mm or even less. I belive is determined by the distance from "point A" to "point B" and not by how much it has been printed. But ye...
by Tincho85
Wed Jul 12, 2017 6:33 pm
Forum: Troubleshooting
Topic: PLA woes (stringing)
Replies: 7
Views: 898

Re: PLA woes (stringing)

Why 100mm/s? I would be one of those to recommend to go slow. It's much safer and it practically doesn't affect printing time. It looks like it's a small print, with small islands very close to each other. If your minimum retract distance is set to 5mm, then I bet retracts are not beign triggered at...
by Tincho85
Tue Jul 11, 2017 2:38 pm
Forum: What are YOU making?
Topic: filastruder
Replies: 43
Views: 6514

Re: filastruder

you made me laugh, thanks kas.
I needed that today.
by Tincho85
Sun Jul 09, 2017 11:05 pm
Forum: Filament
Topic: Polymaker Polysmooth
Replies: 3
Views: 746

Re: Polymaker Polysmooth

Not me, sorry.
If you do buy it share with us how it prints.

Good luck with your build!
by Tincho85
Sun Jul 09, 2017 11:02 pm
Forum: Troubleshooting
Topic: Transported RSV3 and now 1st layer issues
Replies: 10
Views: 1198

Re: Transported RSV3 and now 1st layer issues

Great Don! Hope the new PSU solves it. Keep us posted. PS: I don't know much about electronics, but I do know if you open a power supply you shouldn't touch those capacitors. They could kill you. I'm not saying you don't know this, but as a warning for others. The capacitors can hold a charge for lo...

Go to advanced search