Search found 276 matches

by artexmg
Mon Feb 11, 2019 4:15 pm
Forum: General Tips 'N Tricks
Topic: PEI print bed surface experiments
Replies: 974
Views: 172790

Re: PEI print bed surface experiments

I’m still using my PEI(s) after hundreds of print, most of the time, successfully and the 3M adhesive has been sticking there with no issue.
by artexmg
Mon Dec 10, 2018 12:12 am
Forum: Rostock MAX v3.2
Topic: Rostock MAX v3.2 reviews
Replies: 29
Views: 2713

Re: Rostock MAX v3.2 reviews

I think I can add my two cents here. I bought my first 3D printer 6 years ago from seemeCNC, a rostock Max (I think it was V0.001 LOL). It was acrylic cut and was HARD FUN to assemble, configure and make it work. However, once tuned, it produced really nice prints. But from now and then you have to ...
by artexmg
Sun Dec 09, 2018 2:51 pm
Forum: Rostock MAX v3
Topic: 2 INTO 1 DUAL FILAMENT FEED ADAPTER COMPLETE KIT
Replies: 13
Views: 2290

Re: 2 INTO 1 DUAL FILAMENT FEED ADAPTER COMPLETE KIT

Some of us one the Facebook SeeMeCNC owners group have been sharing our setups with Simplify3D profiles. Send me a private message Alan Zenreich and we can help get you started. Then we can post the results here. Thanks Alan ... I have no more facebook (yes, I know). PMing you right away! Well, bet...
by artexmg
Sun Dec 09, 2018 2:43 pm
Forum: Rostock MAX v3
Topic: 2 INTO 1 DUAL FILAMENT FEED ADAPTER COMPLETE KIT
Replies: 13
Views: 2290

Re: 2 INTO 1 DUAL FILAMENT FEED ADAPTER COMPLETE KIT

Just wondering where in the firmware there is a way to disable the automated filament change in order to use S3D's build in change. Most probably you already resolved this issue, but for the sake of having it documented, I will write down what I found. For DuetWifi, as far as I know, the behavior o...
by artexmg
Sun Dec 09, 2018 2:28 pm
Forum: Rostock MAX v3
Topic: 2 INTO 1 DUAL FILAMENT FEED ADAPTER COMPLETE KIT
Replies: 13
Views: 2290

Re: 2 INTO 1 DUAL FILAMENT FEED ADAPTER COMPLETE KIT

I am not getting 'blobs everywhere' in my prints with S3D. I made a short video of my current setup... are your results substantially different than mine? m Care to share your toolchange Gcode for S3D? ^_^ Hey, not sure if this still helps, but i ran into the same problem with S3D. Still improving ...
by artexmg
Thu Dec 06, 2018 11:28 pm
Forum: Rostock MAX v3.2
Topic: V3.2 Carbon Fiber Rod upgrade
Replies: 9
Views: 1950

Re: V3.2 Carbon Fiber Rod upgrade

Yes, they're working fine in my Artemis. My mistake was to think that the Delta Radius and Printable Radius cloneit3d mentioned were for Artemis, while he was talking about a V3.2.
by artexmg
Thu Dec 06, 2018 5:16 pm
Forum: Artemis
Topic: Artemis + Y-Adapter + Simplify3D
Replies: 9
Views: 1644

Re: Artemis + Y-Adapter + Simplify3D

This is my second print using this profile for S3D, not bad, but still needs to be improved.

Frog Dual.png
by artexmg
Thu Dec 06, 2018 1:44 am
Forum: Artemis
Topic: Artemis + Y-Adapter + Simplify3D
Replies: 9
Views: 1644

Re: Artemis + Y-Adapter + Simplify3D

Ok, I got a first working version profile for Simplify3D (S3D). You can find it attached to this post. I'm trying to replicate the same logic used in CURA by using the "Tool Change Script" and "Starting Script". It is a first working draft of a work in progress, so take it with a...
by artexmg
Wed Dec 05, 2018 7:44 pm
Forum: Rostock MAX v3
Topic: 2 INTO 1 DUAL FILAMENT FEED ADAPTER COMPLETE KIT
Replies: 13
Views: 2290

Re: 2 INTO 1 DUAL FILAMENT FEED ADAPTER COMPLETE KIT

AlanZ wrote:Some of us one the Facebook SeeMeCNC owners group have been sharing our setups with Simplify3D profiles.
Send me a private message Alan Zenreich and we can help get you started. Then we can post the results here.


Thanks Alan ... I have no more facebook (yes, I know). PMing you right away!
by artexmg
Wed Dec 05, 2018 7:41 pm
Forum: Artemis
Topic: Artemis + Y-Adapter + Simplify3D
Replies: 9
Views: 1644

Re: Artemis + Y-Adapter + Simplify3D



Thanks! I didn't know this doc, definitely, I'll have to read it tonight.
by artexmg
Wed Dec 05, 2018 7:39 pm
Forum: Artemis
Topic: Artemis + Y-Adapter + Simplify3D
Replies: 9
Views: 1644

Re: Artemis + Y-Adapter + Simplify3D

The only time you /ever/ need to upgrade the Artemis firmware is if Duet3D publishes a new build that has a bug fix or new feature that you want or need. Unlike the RAMBo firmware, every single aspect of how the Artemis firmware works is controlled by the config.g, config-override.g, and other &quo...
by artexmg
Tue Dec 04, 2018 12:39 am
Forum: Rostock MAX v3
Topic: 2 INTO 1 DUAL FILAMENT FEED ADAPTER COMPLETE KIT
Replies: 13
Views: 2290

Re: 2 INTO 1 DUAL FILAMENT FEED ADAPTER COMPLETE KIT

Glacian, There is no code entered for Tool Change in my S3D profiles. There is only the typical simple start and end commands for the print. It must be relying on the firmware to do the filament swap when switching extruders. Hey AlanZ, already watched your youtube video, your printer is, simple pu...
by artexmg
Mon Dec 03, 2018 11:36 pm
Forum: Artemis
Topic: Artemis + Y-Adapter + Simplify3D
Replies: 9
Views: 1644

Artemis + Y-Adapter + Simplify3D

OK, I just upgraded my printer (Artemis) with the Y-Adapter. Already did the changes to config.g file: MS63 P1 D1 H1 F1 G10 P1 S0 R0 I'm using Simplify 3D, so I created a Dual Extruder Setup (fff file). I can print with both extruders NOT AT THE SAME TIME. Individually both are working fine. My prob...
by artexmg
Mon Dec 03, 2018 2:29 pm
Forum: Rostock MAX v3.2
Topic: V3.2 Carbon Fiber Rod upgrade
Replies: 9
Views: 1950

Re: V3.2 Carbon Fiber Rod upgrade

Yes, I forgot to mention, but the height has to be modified as well, otherwise the nozzle falls short to touch the bed. Just one question, are this values for the Artemis? I'm curious because mine has different values for Delta radius (R=150) and printable radius (B=145). Oh, never mind, this is V3...
by artexmg
Mon Dec 03, 2018 2:21 pm
Forum: Rostock MAX v3.2
Topic: V3.2 Carbon Fiber Rod upgrade
Replies: 9
Views: 1950

Re: V3.2 Carbon Fiber Rod upgrade

Yes, I forgot to mention, but the height has to be modified as well, otherwise the nozzle falls short to touch the bed.

Just one question, are this values for the Artemis? I'm curious because mine has different values for Delta radius (R=150) and printable radius (B=145).
by artexmg
Fri Nov 30, 2018 2:15 am
Forum: Artemis
Topic: Y Axis going down when homing
Replies: 0
Views: 536

Y Axis going down when homing

After about a year with my Artemis working fine, the Y axis started making noises while homing. Then, the axis started going down!

It took me a while, but after troubleshooting it happened to be a loose cable, now it is fixed.

Just reporting in case somebody else has the same trouble.

Cheers!
by artexmg
Wed Nov 28, 2018 4:49 am
Forum: Artemis
Topic: Carbon Fiber Rod Upgrade for Artemis
Replies: 1
Views: 490

Re: Carbon Fiber Rod Upgrade for Artemis

Oops! H = 540
by artexmg
Wed Nov 28, 2018 4:47 am
Forum: Rostock MAX v3.2
Topic: V3.2 Carbon Fiber Rod upgrade
Replies: 9
Views: 1950

Re: V3.2 Carbon Fiber Rod upgrade

For Artemis, I ended up modifying the printer height instead of the dive height for Z probe. the Artemis gains about 10mm in Z with this new arms.
by artexmg
Wed Nov 28, 2018 4:44 am
Forum: Artemis
Topic: Carbon Fiber Rod Upgrade for Artemis
Replies: 1
Views: 490

Carbon Fiber Rod Upgrade for Artemis

It took me a while to realize what parameters to configure after upgrading to a Carbon Fiber rods, so, in case somebody else has same trouble this is what I did (and worked!): Update config.g - For command M665: 1) set Parameter Diagonal Rod Lenght (Parameter L) to new length = 340.5. 2) set Homed h...
by artexmg
Fri Sep 21, 2018 1:47 pm
Forum: General Tips 'N Tricks
Topic: New calibration procedure for Rostock MAX
Replies: 30
Views: 17793

Re: New calibration procedure for Rostock MAX

Cool ... but with the Artemis this is a thing of the PAST! :-)

well ... no for my V1, V2 and V3s LOL thanks then :-)
by artexmg
Mon Jan 22, 2018 5:08 am
Forum: Artemis
Topic: adarcher's build/troubleshooting
Replies: 87
Views: 9361

Re: First homing: horrible grinding sounds

OK, I think I solved it. The spring side of the red pin wasn't super springy so the contact was not consistent. I pulled it out, bent it out a bit and now it's good. It's now taking its time doing the first probe... I'll post again if I get a first print Thanks for all the help! The exact same thin...
by artexmg
Mon Jan 22, 2018 5:04 am
Forum: Artemis
Topic: adarcher's build/troubleshooting
Replies: 87
Views: 9361

Re: First homing: horrible grinding sounds

Looking around for pressure advance, looks like a duet setting... I'll look into it. I've tried 3.5-12mm retraction, stuck to 6.5 25-60mm/s retraction speed, right now it's at 25 since that's what the profile has. I upped the travel speed from 100 to 400mm/s and that seemed to do the most at reduci...
by artexmg
Sat Oct 21, 2017 1:13 am
Forum: General Announcments
Topic: Sad day guys - Eaglezsoar has left us
Replies: 34
Views: 12702

Re: Sad day guys - Eaglezsoar has left us

I haven't come to the forums for months, and now that I did, I found out about this sad news. I never met Carl in person, but I felt like he was an old friend, always writing something encouraging. If I didn't know the topic, just by reading his opinion (because he ALWAYS answer all posts), I could ...
by artexmg
Sat Oct 21, 2017 1:12 am
Forum: General Announcments
Topic: Sad day guys - Eaglezsoar has left us
Replies: 34
Views: 12702

Re: Sad day guys - Eaglezsoar has left us

I haven't come to the forums for months, and now that I did, I found out about this sad news. I never met Carl in person, but I felt like he was an old friend, always writing something encouraging. If I didn't know the topic, just by reading his opinion (because he ALWAYS answer all posts), I could ...
by artexmg
Fri Apr 15, 2016 6:57 pm
Forum: What are YOU making?
Topic: Akemake Spirula Speakers
Replies: 84
Views: 19660

Re: Akemake Spirula Speakers

Mac The Knife wrote:Nice setup!!!

artexmg wrote:And, if you pair them with a good, old, nice bulb-amp, then you got yourself an epic set!
IMG_0814.jpg



Yes, I really like it! :-)

Go to advanced search